785457
5
Zoom out
Zoom in
Previous page
1/27
Next page
2018-08-21 11:59 5/27 Color Control GX manual
Victron Energy - https://www.victronenergy.com/live/
for any reason (after any operational fault or during a black start). The VE.Bus devices will not boot-up
until the CCGX has power …but the CCGX will not boot-up until it has power. This deadlock can be
rectified by briefly unplugging the CCGX VE.Bus cable at which point you will observe the VE.Bus
products will immediately begin to boot-up.
This deadlock can be avoided in two ways:
Power the CCGX from the battery; or
Cut pin 7 in the VE.Bus cable connected to the CCGX
Cutting/Removing pin 7 of the VE.Bus cable to the CCGX (brown/white according to standard RJ45
ethernet cable colour coding) allows the VE.Bus products to start up without waiting for the CCGX to
boot up first.
The disadvantage of cutting pin 7 is that switching the VE.Bus device off will be less effective:
although it will stop charging and inverting, it will still be in standby mode and therefore drawing
more current from the battery than if pin 7 had been left in place. Typically this is only relevant in
Marine or Automotive systems where it's normal to regularly switch the VE.Bus device off. For those
types of systems we recommend that you do not cut pin 7, but simply power the CCGX from the
battery.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron Color Control GX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron Color Control GX in the language / languages: English as an attachment in your email.

The manual is 0.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info