785236
43
Zoom out
Zoom in
Previous page
1/59
Next page
9. VRM Portal
9.1. VRM Portal Introduction
When connected to the internet, a GX device can be used in combination with the Victron Remote Management (VRM) portal,
which enables:
Easy remote access to all statistics and systems status online
Remote Console on VRM: access and configure your system as if you were standing besides it
Remote Firmware updates of connected Solar Chargers and other Victron products.
Use of the VRM App for iOS and Android.
See Internet Connectivity chapter [15] for how to connect the device to the internet.
9.2. Registering on VRM
Instructions are in the VRM Portal Getting Started document.
Note that any system will need to first have been able to successfully send data to the VRM Portal. As long is there has been no
successful connection, it will not be possible to register the system to your VRM user account. In such case, refer to below Trou-
bleshooting section 5.7.
Note that any system will need to first have been able to successfully send data to the VRM Portal. As long is there has been no
successful connection, it will not be possible to register the system to your VRM user account. In such case, refer to below Trou-
bleshooting section 5.7.
9.3. Datalogging to VRM
Data-logs are transmitted to the VRM Portal over the Internet, if it's available. All related settings are available in the VRM Online
Portal menu:
The transmission of the data logs has been designed to work also on bad internet connections. Lines of up to 70% permenant
packet loss are still sufficient to get the data out, even if delayed in some cases.
Adding an external storage device
When unable to transmit the logs, then the GX device will store them to non-volatile storage (ie. data is not lost on a power loss or
reboot).
The GX device has a buffer to store a couple of days worth of logs internally. To extend this period, insert a microSD card or USB
stick. You can see the internal storage status in the settings.
Note that, when inserting such storage device, any internally stored logs will automatically be transferred to the inserted stick: no
data is lost.
With or without an external storage device inserted, the GX Device will always keep trying to connect to the portal and transmit all
backlogged logs. That means that even with months worth of backlog, once it re-acquires an Internet connection, all of the back-
log is sent out. The data is sent in a compressed manner: sending a lot of backlogged data will use considerably less bandwidth
than than sending the data with a continuously available internet connection.
Storage device requirements
MicroSD cards or USB flash drives must be formatted as FAT12, FAT16 or FAT32 file systems - and not exFAT or NTFS.
SD and SDHC type microSD cards of 32 GB capacity and smaller are sold containing FAT12, FAT16 or FAT32. They can be
used without a problem, unless they are subsequently re-formatted to a different file system.
Cerbo GX Manual
43
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron Cebro GX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron Cebro GX in the language / languages: English as an attachment in your email.

The manual is 5.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info