785236
26
Zoom out
Zoom in
Previous page
1/59
Next page
5. Configuration
5.1. Menu structure and configurable parameters
After completing the installation and setting up the internet connection (if required), go through the menu from top to bottom to
configure the Cerbo GX:
Item Default Description
General
Access level User and installer Set this to 'User' to prevent accidental and unwanted changes to the configuration.
Remote support Off Enable this to allow Victron engineers to access your system in case there is a problem.
Reboot? Reboots the GX device
Audible alarm On When there is an alarm on the Cerbo GX or a connected product, the Cerbo GX will beep - unless
this setting is set to 'Off'.
Demo mode Off Turn 'On' to demonstrate product and installation features to a client or at an exhibition. This sim-
ulation mode will allow better understanding without (yet) changing any settings.
Firmware
Firmware Version x.xx Displays the currently installed firmware version
Online updates: Auto update Check only If this is Enabled, the GX device will check with the server to see if there is a new version availa-
ble. It is possible to set to disable, or update automatically
Online updates: Update to Latest release Use the default setting unless you want to participate in test versions. End-user systems should
certainly be set to 'Latest release'.
Install firmware from SD/USB Use this menu to install a new version from a microSD card or USB stick. Insert the card or stick
that holds the new firmware .swu file.
Stored backup firmware With this feature you can go back to the previously installed firmware version.
Date & time
Date/Time local Automatic from internet When connected to the internet, time will be automatically synchronised regardless of this setting.
Toggle the setting Manually input the time where no internet connection is present.
Change time zone Select the correct time zone.
Remote console
Disable password check Password authentication not required for remote console access.
Enable password check Choose password to allow remote console access.
Enable on VRM No Enabling on VRM will allow connection to the Cerbo GX from anywhere via the VRM portal. Trou-
ble shooting Remote Console on VRM
Enable on LAN No Enabling will allow direct connection to the Cerbo GX by typing its IP address or Venus.local into
a web browser, or in VictronConnect when connected to the same network. Only Enable this func-
tion on trusted networks. Disable password check, or set password first
System setup
AC input 1 Generator Select Generator or Grid. (We will shortly be adding the setting 'Shore power' instead of grid.)
AC input 2 Grid Same choices as above.
Monitor for grid failure Disabled Monitors for loss of AC-input, and triggers an Alarm if detected. Alarm is cleared when the AC-
input is reconnected.
Battery monitor Automatic Select the SOC source. This function is useful where there is more than one BMV. More details.
Has DC system No Enable this for boats, vehicles and installations with DC loads and chargers - in addition to Multi
and MPPT chargers. This won't be applicable to most off-grid installations; and any discrepancy
between the DC current measured by the Multi, and by the BMV, will be attributed to a 'DC sys-
tem'. This may be power-in from an alternator, or power-out from a pump, for example.
A positive value indicates consumption. A negative value indicates charging, for example by an
alternator.
Note that the value shown will always be an approximation, and is affected by the variation in
sample rate between elements of the system.
Marine MFD App Configuration Not set Set up what batteries you want to see on the MFD, and by what name.
DVCC
DVCC No
Limit Charge Current No
SVS - Shared voltage sense
STS - Shared temperasure sense
Temperature sensor
SCS - Shared current sense
Display & language
Brightness Configure the brightness between 0 and 100%
Display off time Set time-to-off between 10s / 30s - 1m / 10m /30m - or never
Cerbo GX Manual
26
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron Cebro GX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron Cebro GX in the language / languages: English as an attachment in your email.

The manual is 5.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info