460269
7
Zoom out
Zoom in
Previous page
1/61
Next page
12 13
TROUBLESHOOTING
LCD Display Possible Cause Solution
Low battery Please check if the battery has
been loaded correctly. Replace
the battery.
Product doesn’t
turn off
Internal malfunction Remove and replace battery
Patient or thermometer was
moved from a cold environment.
Thermometer probe was recently
wet cleaned.
Wait at least 20 minutes before
retaking temperature.
Wait at least 5 minutes after
cleaning before retaking
temperature.
Patient or thermometer was
moved from a warm environment.
Patient was laying on the same
side where measurement was
taken.
Wait at least 20 minutes
before retaking temperature.
Measure temperature from
the opposite side.
Internal malfunc tion Restart t hermometer.
The ERR message always comes
with a number. If restarting the
thermometer does not solve the
issue, note this number, call your
authorized Kaz Service Center to
inform them about the ERR.
PRODUCT SPECIFICATIONS
Displayed temperature range: 34-42.2 °C (93.2-108 °F)
Measurement time: 1 second
Operating ambient temperature range: 10-40 °C (50-104 °F)
Display resolution: 0.1 °C or °F
Calibration Accuracy: ± 0.1 °C (0.2 °F)
Battery life: 3 years or 500 measurements
Type BF equipment
Subject to change without notice.
This product conforms to the provisions of the EC directive 93/42/EEC
(Medical Device Directive).
MEDICAL ELECTRICAL EQUIPMENT needs special precautions regarding EMC.
For detailed description of EMC requirements please contact an authorized local
Service Centre (See Authorized Service Centers card).
Portable and mobile RF communications equipment can affect MEDICAL ELECTRICAL
EQUIPMENT.
Thermometer was moved during
temperature taking process
Thermometer was not in the
correct position during the
temperature taking process
Short measurement time
Start button was pressed too
slow
Hold thermometer still and
retake measurement
Make sure yellow ring of
thermometer is behind ear lobe
and retake measurement.
Make sure that the Start Button
is kept pressed until the beep
sounds.
Retake the temperature and
ensure the start button is pressed
down steadily
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vicks Gentle Touch V980E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vicks Gentle Touch V980E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 2,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info