484572
70
Zoom out
Zoom in
Previous page
1/74
Next page
64
6 •
I can brew espresso but there is no pressure for steam.
• Be sure that the power switch is in “Position II.
• Check the reading on the steam-boiler pressure gauge.
Allow time for steam boiler to heat up after turning the machine on
• Remove the steam wand’s tip and check for debris in the tip.
7 •
The coffee tastes bad
The list of causes is nearly endless. Volumes can be written on what can cause espresso to taste bad. Here
are a few tips to help:
• Be sure that the coffee you are using is fresh
• Try a different brand of coffee.
• Use a quality grinder and grind the beans fresh, within a few minutes of each extraction.
If you know someone who makes espresso, invite them over and let them try making espresso with your
equipment and coffee. Sometimes the smallest change in procedure can make a big difference in taste.
8 •
The coffee tastes bitter.
• brewing temperature that is too hot
• coffee that is over-roasted or stale
• cheap, low-quality coffee
• worn burrs of low-quality grinder that makes too much dust
• brew pressure that is too high
• not using enough coffee in the portafilter.
9 •
The coffee tastes too acidic (“sour”).
• brewing temperature that is too cold
• coffee that is under-roasted
• brew pressure that is too low
• bad or spoiled coffee
10 •
I hear a constant hissing sound from inside the DD.
When the power switch is in “Position II”, this could indicate that there has been a failure of the vacuum
breaker valve to seal properly. Discontinue use of the machine, unplug it from the outlet, and contact your
reseller for technical assistance.
11 •
The brew pressure gauge gives erratic readings
The brew pressure gauge on the front panel should only be used as a general indicator as to what is hap-
pening during the brewing cycle. There are only three situations in which the gauge will display any useful
information
• When there is a properly prepared portafilter, filled with properly ground and tamped coffee, locked in the
brewhead, and the brewing process is underway (lever all the way up).
•When you are using preinfusion with a plumbed machine, the gauge’s displayed pressure will drop slightly
when you have moved the lever to the correct position.
• A plumbed machine will show the line pressure while the DD is off and cool, but it is not a very accurate
reading because of the scale of the gauge.
At no other times will this gauge display any accurate information.
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vibiemme Vibiemme Double Domobar version 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vibiemme Vibiemme Double Domobar version 3 in the language / languages: English as an attachment in your email.

The manual is 7,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vibiemme Vibiemme Double Domobar version 3

Vibiemme Vibiemme Double Domobar version 3 Additional guide - English - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info