Manual Vibiemme Domobar Super (page 13 of 44) (English)

783524

Zoom out

Zoom in

1/44

Electronic Automatic

The electronic version features an advanced system to control

the brewing cycle. This model can be identiﬁed by the ﬁve buttons

across the front panel. The ﬁrst four buttons choose the brew vol-

ume. The ﬁrst pair of buttons are for single shots (a short-single and

a normal single volume) and the next two choose the volume for

double shots (a short double and a regular double), but you can use

them any way you like as described below.

The button furthest to the right (the ﬁfth one in line) has mul-

tiple functions. First, you can use it to start and stop the brewing

process just like the semi-automatic described above. Momentarily

press and then release the button and the brew cycle begins. When

you want to stop the brew cycle press and release the button again.

As a novice barista with the Vibiemme Domobar Super, this is the

best mode to use until you become more comfortable with the ma-

chine and the process.

As you progress and your espresso becomes a bit more consis-

tent from day to day, you will be ready to set and use the program-

mable buttons. The following process works the same way for each

of the four buttons. Let’s follow the procedure on how to program

one button, and then you can repeat the process as needed for the other three buttons:

1 - Prepare for a pull as usual- grind, dose, tamp, and lock the

portaﬁlter in place (covered in detail later in this manual).

2 - Depress and hold down the “Manual” button (indicated here)

until the green signal lamp directly above the button begins to blink, then

release the button. Before the blinking stops, depress one of the four pro-

grammable buttons that you wish to program. The brew cycle begins as

soon as you press the button.

3 - When the amount of time you choose has elapsed, press the same programmable button again to stop

the brew. That’s it! That button is now programmed, matching the amount of time of the pull you just concluded.

After you stop the brew cycle during this programing mode, it takes about twenty seconds for the electronics to

“remember” the programming just completed. During that time do not use the machine or the programming just

completed will be lost.

You can now repeat the programming process for the other three buttons if you choose.

Use of the programmed buttons couldn’t be easier! Get ready to make espresso as usual, then just place a

cup under the spouts and press the programmed button of your choice. The pull begins and ends with no further

attention needed. When using a programmed button the pull can be stopped at any time by pressing the manual

(ﬁfth) button.

It is important to note that the buttons are set by time of brewing and not volume of water. Your program-

ming will not produce the same results if factors affecting brewing change such as changing the coffee you use,

the age of the coffee, roast level, changes in grind, or changing the brew temperature or brewing pressure occur.

Regardless of how you begin the brew cycle, when the brew cycle began, the 3-way valve’s solenoid was

energized and it closed the valve, sealing the brew chamber. When the brew cycle ends the pump will be turned

off and the 3-way valve’s solenoid is de-energized and the valve opens and relieves the pressure remaining in

the brewing path, and releases it into the drip tray. This allows you to immediately remove the portaﬁlter without

worrying about the “portaﬁlter sneeze”- that’s a spitting out of coffee or hot water from conﬁned pressure as can

happen on lesser machines without a 3-way valve.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vibiemme Domobar Super in the language / languages: English as an attachment in your email.

The manual is 4.39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vibiemme Domobar Super Manual

Product: