574323
22
Zoom out
Zoom in
Previous page
1/32
Next page
VX-4500/-4600 SerieS Operating Manual
20
call
When using the DTMF Paging System
This feature, if enabled, allows the user to change the 3-digit Page Call code, used
to call other similarly-equipped stations. Press (or press and hold) the assigned
programmable key, followed by the three digits representing the Page Call code of
the station you wish to call. Three tones will be heard after the last key is pressed (the
new code will now be transmitted).
The receiver squelch of the other station will be opened, and you can begin com-
munication.
When using the 2-tone/5-tone Signaling System
This feature, if enabled, press (or press and hold) the assigned programmable key
to send a 2-tone/5-tone sequential tone.
When using the MDC1200 System
This feature, if enabled, press (or press and hold) the assigned programmable key
to send an MDC1200 code.
Press (or press and hold) the assigned programmable key to enter the “Call
Menu” mode.
Press the
[
]
/
[
]
keys (or
[
P1
]
/
[
P2
]
keys) to select the desired Call mode,
then press the
[
P4
]
key to accept the selection. (You may cancel the selection
by pressing the
[
P3
]
key).
Press the
[
]
/
[
]
(or
[
P1
]
/
[
P2
]
keys) to select the station to be called.
You may enter the station’s ID number (four digits) directly from the micro-
phone’s key (
[
0
] - [
9
]
,
[
A
]
-
[
D
]
,
[
#
]
: substitute for “E”, and
[
]
: wild card), if
the optional
MH-75
A8J
microphone is used.
Press the
PTT
switch to send an MDC1200 call.
StatuS Set
(
This function is only available in the
VX-4600
)
Press (or press and hold) the assigned programmable key to change the 5-tone
status code. To change the status code, select the desired digit by pressing the
[
P1
]
key, then change the number by pressing the
[
P2
]
/
[
P3
]
key, and store the number
by pressing the
[
P4
]
key.
You may enter the 5-tone status code directory from the microphone’s numeric key
(
[
0
] - [
9
]
), if the optional
MH-75
A8J
microphone is used.
adVanced operatIon
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vertex Standard VX-4500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vertex Standard VX-4500 in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info