574309

Vertex Standard EVX-531 Manual

29
Zoom out
Zoom in
Previous page
1/52
Next page
EVX-530 SEriES OpErating Manual
27
adVanced operatIon
speed ch up/doWn
(
eVx-534 & eVx-539
)
Press and hold the assigned
PF
key to cause the radio
to begin stepping (repeatedly) upward or downward
through the channels.
prI-1
(
eVx-534 & eVx-539
)
Press, (or press and hold), the assigned
PF
key to re-
call the pre-programmed Priority Channel (Priority-1)
by your Vertex Standard dealer directly. The “
P1
”
will appear at the upper right corner on the display.
prI-2
(
eVx-534 & eVx-539
)
Press, (or press and hold), the assigned
PF
key to
recall the pre-programmed Priority Channel of the
current group (Priority-2) by your Vertex Standard
dealer directly. When PRI-2 channel is recalled, the
“
P
” icon will appear on the display.
prI-2 set
(
eVx-534 & eVx-539
)
Press, (or press and hold), the assigned
PF
key to
toggle the current channel to the priority channel 2
“enable” and “disable”. When PRI-2 channel is re-
called, the “
P
” icon will be indicated on the display.
prI-2 dIsaBle
(
eVx-534 & eVx-539
)
Press (or press and hold) the assigned
PF
key, the
display indicates “PRI2 DI” briey, and disable the
priority channel 2 of the group temporarily.
Press again, (or press and hold again), the assigned
PF
key, the display indicates “PRI2 EN” briey, and
enabling the priority channel 2 of the group.
dIrect ch 1 to ch 4
(
eVx-534 & eVx-539
)
Press, (or press and hold), the assigned
PF
key to
recall the pre-programmed channel by your Vertex
Standard dealer directly.
dIrect ch entry
(
eVx-534 & eVx-539
)
You can call the desired channel directly using this
function:
r
Press, (or press and hold), the assigned
PF
key.
A tone will sound, and the current group/channel
will appear on the display.
r
In the
EVX-534
, select the desired digit of the
group number and channel number using the
[
A
]
/
[
B
]
keys, then change the number using the
SIDE-1/SIDE-2
buttons.
In the
EVX-539
, enter the desired group number
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vertex Standard EVX-531 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vertex Standard EVX-531 in the language / languages: English as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info