574309

Vertex Standard EVX-531 Manual

28
Zoom out
Zoom in
Previous page
1/52
Next page
EVX-530 SEriES OpErating Manual
26
adVanced operatIon
Press and hold the assigned
PF
key for a pre-
programmed period to initiate an emergency call on
the pre-defined channel. In the
EVX-534/-539
, the
“- EMG -” indication will be indicated on the dis-
play. For further details contact your Vertex Standard
dealer.
To revive the radio from the Emergency mode, just
press and hold again the assigned
PF
key or turn off
the radio.
lone WorKer
Press, (or press and hold), the assigned
PF
key to
activate the Lone Worker feature. The Lone Worker
feature is designed to emit an alarm for 30 seconds
when the Lone Worker Timer (programmed by your
Vertex Standard dealer) has expired.
Press again, (or press and hold again), the assigned
PF
key, the Lone Worker feature is disabled. If the
user does not reset the timer by pressing the
PTT
switch, the radio switches to Emergency mode.
In the
EVX-534/-539
, 1) when the Lone Worker fea-
ture is activated, the “ ” icon will be indicated on the
display, 2) when the Lone Worker feature is “on” and
“off”, the display indicates “L-WK ON” and “L-WK
OFF” briey.
group change
(
eVx-531
)
The
EVX-531
has two Channel Groups (Group 1 and
Group 2).
Press (or press and hold) the assigned Programmable
key to change the Channel Group to the opposite
Group. When there is a radio in the Group 2, the LED
indicator will blink with a pre-defined color. Once
the desired Group is reached, rotate the
CH
Selector
knob to select the desired channel within the selected
Group.
group up/doWn
(
eVx-534 & eVx-539
)
Press, (or press and hold), the assigned
PF
key to
select a different group of channels. A group number
will appear at the upper right corner and a group
name will appear briey on the display.
ch up/doWn
(
eVx-534 & eVx-539
)
Press, (or press and hold), the assigned
PF
key to se-
lect a different channel. A channel name will appear
briey on the display.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vertex Standard EVX-531 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vertex Standard EVX-531 in the language / languages: English as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info