815507
24
Zoom out
Zoom in
Previous page
1/56
Next page
2424 3-90-30007498Vermont Castings • Radiance RADVT Installation Manual_R32 • 10/23
LG489
front logs
6/07
Front Left Log
Front Right Log
Figure 3.24 - Front Logs
LG490
all logs
6/07
Left Cross Log Rear Log Right
Cross Log
Front
Right Log
Front Left Log Ember Bed
Figure 3.25 - Completed Installation
E. Thermostat Connection (optional):
Use only a thermostat rated for 500 - 750 millivolts.
Check the table below for the appropriate gauge thermostat
wire to use for the length of lead required in your installation.
1. Install the wall thermostat in the desired location and run
the wires to the stove location. Terminate these leads
with 1/4" female connectors.
2. Connect the thermostat or wall switch wires to the valve,
Figure 3.26.
Thermostat
Wire/Gauge Maximum Run
18 20 Feet
16 20 - 40 Feet
14 up to 60 Feet
WARNING
!
Electrical connections should only be performed by a
qualied, licensed electrician. Main power must be o󰀨
when connecting to main electrical power supply or
performing service. All wiring shall be in compliance
with all local, city and state codes. The appliance, when
installed, must be electrically grounded in accordance
with local codes or in the absence of local codes, with the
National Electrical Code ANSI/NFPA 70 (latest edition) and
Canadian Electrical Code, CSA C22.1.
Figure 3.26 - Install wiring to Thermostat before connecting to valve.
SIT VALVE
FP1622
SIT valve w/switch
P
I
L
O
T
TPTH TP TH
Valve
Thermopile
Millivolt Thermostat
CAUTION
!
Label all wires before disconnecting when servicing
controls. Wiring errors can cause improper and dangerous
operation.
WARNING
!
Do not connect wall switch to 110 V circuit.
CAUTION
!
Electrical connections should only be performed by a
qualied, licensed electrician. Main power supply must
be turned o󰀨 before connecting fans to the main electrical
power supply or performing service.
WARNING
!
Electrical Grounding Instructions: This appliance is
equipped with a three-prong (grounding) plug for your
protection against shock hazard and should be plugged
directly into a properly grounded three-prong receptacle.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vermont Castings Radiance Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vermont Castings Radiance Series in the language / languages: English as an attachment in your email.

The manual is 6.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vermont Castings Radiance Series

Vermont Castings Radiance Series User Manual - French - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info