797887
26
Zoom out
Zoom in
Previous page
1/192
Next page
Venus 4 Sport
2020-10
Installation and adjustment
24
EN
NL
3.11 Thermal fuses
To protect the motor against overload, your scooter have a
thermal safety mechanism on the right side of the battery
housing. The thermal fuse will automatically cut the motor to
prevent overheating and thus rapid wear and tear or
breakdowns. You can access the thermal safety device
through a gap in the back of the synthetic cover.
The thermal safety device can go loose if you go up or down
slopes that exceed the maximum gradient indicated.
Nominal loads that exceed the maximum permitted could
also cause the device to jump out. The maximum values not
to exceed are indicated in the chapter “Technical
Specifications”.
To be able to use the scooter again, remove the overload
and wait till the motor has cooled off. Then gently press the thermal safety mechanism back in. Your scooter is now
ready for use again.
3.12 Anti-tipping
An anti-tipping is fixed to the frame of the scooter on the
back side. It is not possible to remove this. The anti-tipping
is there for your safety. It prevents the scooter from tipping
over backward when you drive over small obstacles that do
NOT exceed the maximum height specified.
3.13 Changing the batteries
L CAUTION: Risk of burns - Do not come in contact with the acid from the batteries. See for a good
ventilation of the battery compartment.
Even if the battery is used properly, it is natural for the battery’s capacity to reduce with time, which results in
reduced battery range compared to a brand new battery. Therefore, when you find the battery’s range is about only
50% of the range when the batteries were new, it is time to replace the batteries. Please see your dealer about
replacement batteries. If you continue to use the old battery when it should be replaced, it could lead to a rapid
decline in performance. Replace both batteries together.
The battery shall be changed by trained personel.
The wiring is well situated in the scooter. Do not attempt to re-locate the wiring by yourself. The improper
installation of the wiring may result in pinching the
wiring between the battery box, which cause
failure to the electronic system of your scooter.
Be sure the battery cables are connected to the
right battery.
Remove the battery housing:
1. Turn the switch to the unlock symbol.
2. Now you can lift the battery housing
out the scooter.
Mount the battery housing:
1. Place the battery housing in the scooter.
2. Turn the switch to the lock symbol.
3. Check that the battery housing is firmly secured
in the scooter, by lifting this gently upwards with
the handgrip.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vermeiren Venus 4 Sport - 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vermeiren Venus 4 Sport - 2020 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 12.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info