797887

Vermeiren Venus 4 Sport - 2020 Manual

25
Zoom out
Zoom in
Previous page
1/192
Next page
Venus 4 Sport
2020-10
Installation and adjustment
23
EN
NL
3.10 Tyre changing
L CAUTION: There must be no air in the tube before it can be removed.
L CAUTION: Risk of damage - If handled improperly, the rim might be damaged.
If you want to change the tyres or inner tubes, you should note the following:
Before you can remove a tyre, you must let all the air out of the tube, and insert a tyre lever between the tyre and the
rim. Then slowly and carefully push the lever downwards. This will pull the tyre over the edge of the rim. If you then
move the lever along the rim, the tyre will jump out. Now carefully remove the tyre from the rim and then remove the
tube.
Note the following before inserting the new tube:
Check the rim bed and the inside wall of the tyre for foreign matter and clean these properly if necessary. Check the
condition of the rim bed, especially around the position of the air valve. Please use only genuine original replacement
parts. No liability is accepted for damage caused by non-genuine replacement parts. Kindly contact your specialist
dealer.
Assembly:
L WARNING: Risk of injury - Check that the pressure is correct.
L CAUTION: Risk of injury - Make sure that no objects or body parts are pinched between the tyre and
the rim when mounting a tyre.
Put the deflated tube around the center of the rim. Make sure that
the valve juts out the valve opening in the rim.
Push the tyre over the edge of the rim, starting behind the air valve.
Inflate the tube slightly until it is round, and place it inside the tyre.
If the tube fits snugly inside the tyre without any folds (in the case of
folds: let out some air), then the upper side of the tyre can be
pressed lightly onto the rim with both hands, starting at the air valve.
Check all around on both sides that the tube is not pinched between the rim and the edge of the tyre. Lightly push
the air valve inwards and pull it out again to make sure that the tyre is positioned properly in the region of the air
valve.
To ensure that the wheel is inflated correctly, admit only so much air initially that the tyre can still be easily pushed
inwards by using your thumbs. If the check-lines are equidistant from the edge of the rim on both sides of the tyre,
then the tyre is centered properly. If not - let out the air and position the tyre afresh. Now the tyre can be inflated to
its full operating pressure (note the maximum) and the valve cap should be replaced.
Only an expert can guarantee correct assembly. Work not done by your specialist dealer, would void
any warranty claims.
When inflating the tyres, always check that the pressure is correct. The correct pressure is given on
the tyre walls.
Use only inflating equipment which complies with regulations and indicates the pressure in bar. We do
not accept any liability for damage caused by using inflation equipment not supplied by the
manufacturer.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vermeiren Venus 4 Sport - 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vermeiren Venus 4 Sport - 2020 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 12.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info