514917
8
Zoom out
Zoom in
Previous page
1/28
Next page
RAPIDO
2012-07
6
ARMRESTS
The height of the armrests can be adjusted by loosening
handle (1) and pulling it up or pushing it down.
To adjust the width between the armrests, loosen screw (2)
and push it to the desired position. Then retighten the screw.
Before using the wheelchair, make sure that all
screws are tightened properly to prevent injury and/or
damage.
Adjustments should be carried out in such a way that
the stability of the armrests is not endangered.
Never pick the wheelchair up by grasping the armrests. Only solid and fixed parts of the
framework should be used for transport.
The armrest containing the driving electronics can only be removed if the electronic unit has been
removed (see the Section “Driving electronics”).
The armrests may only be lowered or removed when you are quite sure that the user of
the wheelchair is secured against tipping over sideways.
If you detect damage or wear in the armrest supports, contact your dealer who can correct these
deficiencies.
To avoid endangering your own safety, do not use the wheelchair when changes, damage, or
wear are noticed in the suspensions.
Any changes made to the armrests and or armrest supports are at your own responsibility.
Your warranty claim then expires immediately.
DRIVING ELECTRONICS
When the motors are activated, you can set the wheelchair in motion by means of the steering (see
Figure A).
Figure A To release the motors, turn the motor lever (1)
outwards on each side.
The wheelchair can only be driven if the motor lever
(1) points backwards. Before use the lever should be
turned to the desired position.
For electronic driving connect the motors.
* Shark controller
The instructions for use from the operator units you can find in the seperate user manals of the
operator units that is included with your wheelchair.
Changing the software is only allowed by Vermeiren. For changes in the software contact
Vermeiren.
1 1
1
2
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vermeiren Rapido at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vermeiren Rapido in the language / languages: English as an attachment in your email.

The manual is 0.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vermeiren Rapido

Vermeiren Rapido User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info