514917
6
Zoom out
Zoom in
Previous page
1/28
Next page
RAPIDO
2012-07
4
SLIDING GRIPS
The sliding grips are situated at the top end of the backrest tubes. The backrest tubes must be in
position before your helper can use the grips (see the Section “Back”).
THE BACK
The backrest has been designed to be removable for
transportation purposes. Loosen the lever screws (1) and
remove the back together with the backrest tubes. Then you
can easily push the wheelchair into a car by using a ramp for
example. For driving, the backrest tubes must be inserted
smoothly and fully into the frame sockets. Then fully retighten
the lever screws (1).
Before use you should check that the back is fixed tightly to
the backrest tubes. If not, you must tighten the fixing screws
(2) properly for securely joining the back with the backrest
tubes.
Take care that the backrest tubes do not tilt or jam in the sockets. To avoid putting strain on
the back, the tubes should be inserted correctly. Avoid deformations that could endanger the
safety of the wheelchair and its user.
Take care that the fixing screws (1) are properly tightened before using the wheelchair.
Otherwise the back can be detached and cause damage to the wheelchair and injure the user.
Take care that no extra loads are placed on the back (e.g. a rucksack), since it may disturb the
balance and cause the wheelchair to tip over backwards.
If the back or some of its components are marred by wear and tear or other factors, kindly
contact your dealer. He shall gladly be of further assistance.
THE SEAT
The seat is anatomical and cushioned and has suspension hooks fixed to its underside by means of
which it is placed on the framework. These hooks lock the seat in position between the side members
of the collapsible framework. To remove the seat, simply lift it out of the framework. The imitation
leather cover is washable. We can supply a SOFT version of the seat to patients who are pressure
sensitive at certain points (dekubitusprophylaxe).
Your wheelchair is primarily fitted with a standard
cushioned seat. It must be placed snugly on the
folded-open tube frame and the suspension hooks
must engage the structure evenly.
The inclination of the seat can be changed by
adjusting the front and rear suspension hooks
separately.
When the wheelchair is to be folded, simply lift the
seat out.
1
1
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vermeiren Rapido at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vermeiren Rapido in the language / languages: English as an attachment in your email.

The manual is 0.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vermeiren Rapido

Vermeiren Rapido User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info