797894
17
Zoom out
Zoom in
Previous page
1/144
Next page
D200, D200 3
2023-02
Using your wheelchair
13
EN
NL
Always stay on the pavement when riding on public roads.
Pay attention if the road has holes or gaps that may cause entrapment of the wheels.
Avoid stones and other objects that may block the wheels.
Make sure that the footplates do not touch ground while taking an obstacle.
Do not use your wheelchair on an escalator.
If available, wear your safety belt.
Always keep the swing range of the footplate in mind to prevent bystanders from being injured
or objects from being damaged.
If you don’t have enough
experience riding your wheelchair, ask assistance of an attendant.
Keep your arms away from the wheels and keep your feet on the footplate.
Stairs should always be negotiated with the help of two attendants.
Never try to use stairs that are not appropri
ate for wheelchairs.
3.9.1 Riding your wheelchair:
1. Release the brakes.
2. Take both hand rims at their highest position.
3. Lean forward and push the hand rims forward until your arms are straight.
4. Move your hands back to the top of the hand rims and repeat the movement.
3.9.2 Moving on slopes
Risk of injuries
Moving on slopes as slow as possible.
If your attendant does not have enough force to control the wheelchair, put on the brakes.
Lean forward to move your centre of gravity forward. To improve a better stability
.
1. If available on the wheelchair, wear the safety belt.
2. Do not attempt moving on too high slopes. The maximum slope angles
(upwards and downwards) are mentioned in table 1.
3. Ask an attendant to help you moving on the slope.
4. Lean forward to move your centre of gravity forward.
3.9.3 Negotiating steps or kerbs
Risk of injuries
If you do not
have enough experience with your wheelchair, ask assistance of an attendant.
Getting down steps or kerbs
Riding down low kerbs can be done moving forwards. Make sure that the foot bracket does not
touch the ground.
A practiced user can negotiate small steps or kerbs by himself:
1. Bring balance on the rear wheels to reduce the pressure on the front
wheels.
2. Negotiate the kerbs.
Higher kerbs can be taken forward with an attendant:
1. Ask the attendant to tip the wheelchair slightly backwards.
2. Get past the kerbs while moving on the rear wheels.
3. Put the wheelchair back on the four wheels.
WARNING
WARNING
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vermeiren D200 - 2023 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vermeiren D200 - 2023 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 14.92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info