714725

Veritas MyJanis Edition Manual

48
Zoom out
Zoom in
Previous page
1/76
Next page
46
* The hemmer foot is an optional
accessory not supplied with your
machine.
For hems in fine or sheer fabrics.
Set the machine as illustrated " ".
Neaten the edge of the fabric. At the
beginning of the hem, turn under the edge
twice by about 3 mm (1/8") and sew 4-5
stitches to secure. Pull the thread slightly
towards the back. Insert the needle into
the fabric, raise the presser foot and guide
the fold into the scroll on the foot. (1)
Gently pull the fabric edge towards you
and lower the presser foot. Begin sewing,
guiding the fabric into the scroll by holding
it upright and slightly to the left. (2)
*De rolzoomvoet is een optioneel
accessoire dat niet standaard bij de
machine geleverd wordt.
Machine zoals afgebeeld instellen.
Stel de steekkeuzeknop in op " ".
Voor het naaien van zomen in lichte en
dunne stoffen.
De stofkant die afgezoomd wordt, moet
altijd recht afgeknipt zijn. De stofkant
wordt aan het begin van de zoom ca. 3
mm dubbel omgevouwen en met 4-5
steekjes vastgenaaid. De stof aan de
draden een beetje naar achteren trekken.
Naald in de stof zetten, naaivoet
omhoogzetten, stofkant door de gleuf van
de zoomvoet leiden. (1)
Verder naaien en de stof gelijkmatig door
de gleuf van de zoomvoet leiden. (2)
*Le pied ourleur est un accessoire
optionnel qui n'est pas inclus avec votre
machine.
Régler la machine comme indiqué sur le
schéma.
Régler le sélecteur de points sur " ".
Pour ourler les tissus fins et légers.
Le tissu à ourler doit être coupé droit au
préalable.
Replier l'extrême bord du tissu en formant
un double pli d'env. 3mm et le maintenir
par 4 ou 5 points. Tirer légèrement les fils
d'aiguille et de canette vers l'arrière,
piquer l'aiguille dans le tissu. Relever le
pied-de-biche. Guider le bord vif du tissu
pour qu'il s'engage dans le cornet de
l'ourleur. (1)
Continuer de piquer en veillant à ce que le
tissu pénètre uniformément dans le cornet
de l'ourleur. (2)
Naaien met de zoomvoet
Couture avec le pied ourleur
Sewing with the hemmer foot
FR
NL
EN
… 48 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Veritas MyJanis Edition at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Veritas MyJanis Edition in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info