806415

Veripart VPSZ103 Manual

23
Zoom out
Zoom in
Previous page
1/36
Next page
23
Attention:
• Only use the vacuum cleaner when the lters and a dust bag have been placed. If not,
the suction power could be reduced or the motor could be damaged.
• Remove the plug from the socket before cleaning or replacing the lters.
• Torn or not properly sealing lters could damage the motor. When a lter is defective, it
must be replaced by a new original lter.
• The lters may not be cleaned in the dishwasher.
• Do not use a hair dryer to dry the lters.
Removing a clog
When the dust bag full indicator becomes red:
• Check whether the dust bag is full.
• When the dust bag is not full, check whether the lters should be cleaned.
• Check that the tube or hose is not clogged. Use a stick or something similar to remove
the clog from the tube or hose.
Warning: the dust bag full indicator remains red if:
• the dust bag is full
• the tube or hose is clogged
• the lters are dirty
Veripart recommends the use original Veripart dust bags. Any damage caused by using non-
original Veripart dust bags is not covered by the warranty.
If you choose to use non-original Veripart dust bags, do make sure the capacity of these dust
bags corresponds with the capacity of the vacuum cleaner.
Manufacturers of vacuum cleaner bags often use the name “Uni-bag” for vacuum cleaner bags
that may be suitable for the Veripart vacuum cleaner.
In case of doubt, you can contact the manufacturer of those vacuum cleaner bags.
Resolving failures
When a failure occurs with the appliance, please rst check the following before contacting
the customer service.
• Is the socket in good order? Connect another electrical appliance to test the socket.
• Is the dust bag full? Observe the instructions in chapter MAINTENANCE.
• Is the lter clogged? Observe the instructions in chapter MAINTENANCE.
• Is the accessory used or the hose clogged? Observe the instructions in chapter
MAINTENANCE.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Veripart VPSZ103 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Veripart VPSZ103 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 1.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info