806415
22
Zoom out
Zoom in
Previous page
1/36
Next page
22
6. MAINTENANCE
Regularly check the hose, dust bag and lter to prevent problems. Empty the hose when it
is clogged. Replace the dust bag when it is full and clean or replace the lters when they
are dirty.
Replacing the dust bag
Check that the vacuum cleaner is off and remove the plug from the socket before replacing
the dust bag or motor lter. Never use the vacuum cleaner without a dust bag or motor lter.
Replace the dust bag when the dust bag full indicator becomes red or when the dust
bag seems to be full.
Open the dust bag compartment by pressing in the handle. Lift the
cover and carefully remove the full dust bag from the holder. Throw
away the full dust bag.
Fold a new dust bag as shown and slide it in the dust bag holder.
Open the cover of the dust bag compartment. The opening of the
dust bag is automatically pushed on the correct location when the
cover is being closed. The cover of the dust bag compartment cannot
be closed when the dust bag has not been placed correctly. Place
the dust bag once more, in accordance with the instructions.
Replacing or cleaning the motor lter
The motor lter must be replaced after every 4 dust bags. In between,
it can be cleaned.
Remove the motor lter by sliding the holder upwards.
Place a new motor lter in the holder and slide it back or clean
the motor lter with lukewarm water and allow it to dry in the air
for 24 hours before placing the motor lter back in the holder.
Cleaning or replacing the HEPA lter
The HEPA lter cleans the air one more time before it is ejected by the
vacuum cleaner. Clean the HEPA lter at least once every six months
or when it is very dusty. When the HEPA lter is damaged, it must be
replaced by a new original lter.
Press the clip to open the grille under which the HEPA lter is
located.
Remove the HEPA lter.
Clean the HEPA lter with lukewarm owing water and allow the
lter to dry in the air for 24 hours. Do not use cleaning agents or
brushes.
Only place the HEPA lter back once it is fully dry, or place a
new HEPA lter.
Place back the grille. Make sure it is properly attached.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Veripart VPSZ103 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Veripart VPSZ103 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 1.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info