806413

Veripart VPSB103 Manual

23
Zoom out
Zoom in
Previous page
1/40
Next page
23
6. MAINTENANCE
Check the hose, dust collector and lters regularly to prevent any problems. If the hose is
clogged, empty it. Empty the dust collector when it is full and clean or replace the lters
when they are dirty.
Emptying the dust collector
On the dust collector you will nd a maximum indication max ll [a]. Empty the dust
collector when the amount of dirt reaches the maximum indication.
1. Grab the handle of the dust collector and press the button [b] to
release the dust collector. Lift the dust collector.
2. Hold the handle of the dust collector while holding it above a dust bin.
Press the button [c] to open the bottom of the dust collector. The bottom
lid opens automatically and releases the dirt in the dust bin.
3. To fully empty the dust collector, calmly shake it above the dust bin.
4. Close the bottom lid of the dust collector. You will hear a click when the
bottom lid is closed correctly.
5. Place the dust collector back on the vacuum cleaner. You will hear a
click when it is placed correctly.
Cleaning the cyclone lter
The lters play an important part in the efciency of the vacuum cleaner. When the lters are
clogged the performance will decrease. Therefore cleaning or replacing the lters frequently
is essential. Clean the cyclone lter every six months.
1. Grab the handle of the dust collector and press the button [b] to
release the dust collector. Lift the dust collector.
2. Pull the clip [d] forwards and open the lid of the dust collector.
3. Pull the cyclone lter [e] out of the dust collector by the rubber edge.
4. Clean the cyclone lter [e] under lukewarm water. Do not use any
cleaning agents or brushes.
Cleaning the lter will remove the dirt, but will not restore the original
white color of the lter. The color of the lter is not of any inuence to
the performance.
5. Press a much water as possible out of the cyclone lter and let it air
dry completely for at least 24 hours.
Attention: using a damp cyclone lter could cause damage to the engine.
6. Press the cyclone lter back in the dust collector.
7. Close the lid of the dust collector. You will hear a click when it is closed correctly.
8. Place the dust collector back on the vacuum cleaner. You will hear a click when it is placed
correctly.
b
ca
d
e
d
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Veripart VPSB103 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Veripart VPSB103 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 1.62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info