806413

Veripart VPSB103 Manual

22
Zoom out
Zoom in
Previous page
1/40
Next page
22
5. USE
Check that the voltage stated on the information plate matches the voltage used in your
region.
Switching on the vacuum cleaner
1. Place the vacuum cleaner on a sturdy and at surface.
2. Carefully pull the cord out of the vacuum cleaner and insert the plug in a power socket.
Do not pull the cord any further than the red mark.
3. Adjust the telescopic tube to the required length.
4. Switch on the vacuum cleaner by pressing the on/off button with your foot.
5. Depending on the surface to be cleaned, you can adjust the brushes in the oor nozzle.
When cleaning hard oors, you must make sure the brushes are extended.
When cleaning oor coverings or oor cloths, the brushes must be retracted.
6. Depending on the surface to be cleaned, you can adjust the suction power. Slide the
suction power controller to the left or to the right between the min and max indications.
Minimum suction power: delicate materials, curtains
Medium suction power: furniture, rugs and mattresses
Maximum suction power: tiles, wooden or other hard oors
7. When it is difcult to move the oor nozzle over the oor, you can adjust the suction
power with the min - max suction power controller or with the extra suction power
controller on the handle of the hose.
Switching o the vacuum cleaner
1. Switch off the vacuum cleaner by pressing the on/off button with your foot.
2. Remove the plug from the socket, hold the plug and allow the cord to wind automatically
by pressing the button for automatic rewinding with your foot. Guide the cord with
your hand to prevent possible damage. The cord is automatically wound up in the
vacuum cleaner.
Storage
For easy storing the vacuum cleaner.
• Rewind the cord by pressing the cord rewinding foot pedal .
• Push the slide button on the telescopic tube upwards and push the telescopic tube
together to make it shorter. Release the slide button and let the tube snap into place.
• Park the vacuum cleaner and slide the oor nozzle in the attachment at the back of the
device.
The parquet brush is suitable for parquet oors, laminate or wood oors and all other
smooth and hard oors.
6. Accessory holder: the accessory holder can be attached to the telescopic tube. The
accessories can be attached to the holder so that they are always within reach during
use.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Veripart VPSB103 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Veripart VPSB103 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 1.62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info