567006

Velux SCL Manual

13
Zoom out
Zoom in
Previous page
1/30
Next page
1313
x = 65-95 mm
x = 125-155 mm
44 mm
58 mm
16 mm
8 mm
GFL: C02, M04,
M06, M08
A
B
C
max 10 mm
max 10 mm
max 10 mm
ENGLISH: Determine measurement x on the top
frame and fit drilling jig temporarily.
A: x = 65-95 mm: Position the distance arm of the
drilling jig against the window frame.
B: x = 125-155 mm: Adjust frame extension LGI as
shown. Position the distance arm of the drilling jig
against the window frame.
C: Roof window GFL in sizes shown: The measure-
ment from the end of the distance arm to the side
frame must be 80 mm.
DEUTSCH: Das Maß x des Blendrahmen-Oberteils
ermitteln, und die Bohrschablone befestigen.
A: x = 65-95 mm: Das Distanzstück der Bohrschab-
lone muss an den Blendrahmen des Fensters stoßen.
B: x = 125-155 mm: Fensterstockverlängerung LGI
wie gezeigt vorbereiten. Das Distanzstück der Bohr-
schablone muss an den Blendrahmen des Fensters
stoßen.
C: Dachflächenfenster GFL in den angegebenen
Größen: Der Abstand zwischen dem Ende des
Distanzstückes und dem Blendrahmen-Seitenteil
muss 80 mm sein.
FRANÇAIS : Déterminer la mesure x sur la traverse
haute du dormant et installer provisoirement le
gabarit de perçage.
A : x = 65-95 mm : Positionner le gabarit de
perçage en plaçant la tige d'écartement contre le
dormant.
B : x = 125-155 mm : Découper l'extension de
dormant (LGI) selon les indications. Positionner le
gabarit de perçage en plaçant la tige d'écartement
contre le dormant.
C : Fenêtre GFL dans les dimensions indiquées : la
distance du bout de la tige d'écartement au montant
du dormant doit être de 80 mm.
DANSK: Målet x på overkarmen fastlægges, og
boreskabelonen monteres midlertidigt.
A: x = 65-95 mm: Afstandsarmen på boreskabelo-
nen skal støde op mod sidekarmen.
B: x = 125-155 mm: Karmforlænger LGI tilpasses
som vist. Afstandsarmen på boreskabelonen skal
støde op mod sidekarmen.
C: Ovenlysvindue GFL i angivne størrelser: Afstand-
en fra enden af afstandsarmen til sidekarmen skal
være 80 mm.
NEDERLANDS: Stel maat x vast aan de bovenkant
van het dakvensterframe en monteer tijdelijk de
boormal.
A: x = 65-95 mm: Plaats de afstandsarm van de
boormal tegen het dakvensterframe.
B: x = 125-155 mm: Pas het verlengde binnenframe
LGI aan zoals afgebeeld. Plaats de afstandsarm
van de boormal tegen het dakvensterframe.
C: Dakvenster GFL in de aangegeven maten: De
afstand van het einde van de afstandsarm tot de zij-
kant van het dakvensterframe moet 80 mm zijn.
ITALIANO: Misurare la distanza sul telaio superio-
re indicata con x nelle illustrazioni A e B.
A: x = 65-95 mm: Mantenere il blocco distanzia-
tore della dima appoggiato sul telaio e fissarlo con
le viti.
B: x = 125-155 mm: Smussare il telaio aggiuntivo
(LGI) come illustrato in figura (vedere misure). Man-
tenere il blocco distanziatore della dima appoggia-
to sul telaio e fissarlo con le viti.
C: Finestra per tetti GFL delle misure indicate in figu-
ra: la distanza tra l'estremità del blocco distanzia-
tore ed il telaio laterale dev'essere di 80 mm.
ESPAÑOL: Determine la medida x en la parte
superior del marco y fije la guía del taladro provi-
sionalmente.
A: x = 65-95 mm: Coloque el separador lateral de
la guía del taladro contra el marco.
B: x = 125-155 mm: (Casi nunca se dará este caso)
Practique el cajeado en el recercado (LGI) como se
indica. Coloque el separador lateral de la guía del
taladro contra el marco.
C: Ventana GFL en los tamaños indicados: Entre el
separador lateral de la guía del taladro y el marco
debe haber una distancia de 80 mm.
450942-0908-SCL-in.indd 13450942-0908-SCL-in.indd 13 26-08-2008 12:45:4626-08-2008 12:45:46
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velux SCL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velux SCL in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 9,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info