Manual Velux MSL (page 25 of 37) (English, German, Dutch, Danish, French, Italian, Spanish)

567000

Zoom out

Zoom in

1/37

4848 4949

10 mm

45 mm

2 3

ø 3 mm

English: Remove and discard cover screws (1). Place sealant on

screw holes (2). Fix bottom brackets with 45 mm screws supplied (3)

and adjust so that they are parallel to the cover. Drill hole in cover

through hole in bracket (4) and fix bracket with 10 mm screw sup-

plied (5).

Deutsch: Blechschrauben entfernen (1). Dichtungsmaterial auf

Schraubenlöcher kleben (2). Die unteren Beschläge mit 45 mm

Schraube befestigen (3). Sicherstellen, dass Beschläge und

Abdeckbleche parallel verlaufen. Loch im Abdeckblech durch Loch

im Beschlag bohren (4) und Beschlag mit 10 mm Schraube befes-

tigen (5).

Français : Retirer et jeter les vis des profilés (1). Mettre une pastille

de mastic sur chaque trou de vis (2). Fixer les pattes basses à l'aide

d'une vis de 45 mm (3) et les positionner pour être bien parallèles

aux profilés de recouvrement. Percer un trou dans le recouvrement au

travers de celui de la patte (4) et fixer la patte avec la vis de 10 mm (5).

Dansk: Beklædningsskruerne fjernes og smides væk (1). Tætnings-

materiale klæbes på skruehullerne (2). De nederste beslag mon-

teres med 45 mm skrue (3) og rettes op, så de ligger parallelt med

beklædningen. Hul bores i beklædning gennem hul i beslag (4), og

10 mm skrue sættes i (5).

Nederlands:

Verwijder de schroeven van de afdeklijsten en gooi

deze weg (1). Breng het afdichtingsmateriaal aan op de schroef-

gaten (2). Plaats de onderste steunen met een 45 mm schroef in het

bovenste schroefgat (3) en pas de steunen aan zodat ze paralel

lopen met de zij-afdeklijst. Boor een gat in de afdeklijst door het gat

in de steun (4) en zet de steunen vast met 10 mm schroeven in het

onderste schroefgat (5).

Italiano: Togliere e scartare le viti del rivestimento (1). Inserire il

sigillante nei fori delle viti (2). Fissare le staffe inferiori con delle viti

da 45 mm (3) e aggiustarle in modo che siano parallele al rivesti-

mento. Forare il rivestimento attraverso il foro presente nella parte

bassa della staffa (4) e fissare le staffe con delle viti da 10 mm (5).

Español: Retire y elimine los tornillos de los perfiles (1). Selle los ori-

ficios de los tornillos (2). Fije los soportes inferiores con tornillos de

45 mm (3) y ajústelos hasta que queden paralelos al perfil. Haga un

taladro en el perfil, a través del orificio del soporte (4) y fijelo con

un tornillo de 10 mm (5).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Velux MSL in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 6,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Velux MSL Manual

Product: