Manual Velux MSL (page 22 of 37) (English, German, Dutch, Danish, French, Italian, Spanish)

567000

Zoom out

Zoom in

1/37

4242 4343

ø 3 mm

20 mm

175 mm

17 mm

English: Remove covers indicated temporarily (a). If there is a screw,

remove it (b). If there is a mark at the top instead of a screw, drill

hole through mark (c). If there is neither screw nor hole, measure

position of hole. The position of the hole depends on whether the

side frame cover has an upturned edge or not (d, e). If d or e has

been chosen, subsequently drill hole as shown in c.

Deutsch: Dargestellte Abdeckbleche vorübergehend entfernen (a).

Sollte oben eine Schraube vorhanden sein, Schraube entfernen (b).

Sollte oben eine Markierung statt einer Schraube vorhanden sein,

Loch durch die Markierung bohren (c). Sollte weder eine Schraube

noch ein Loch vorhanden sein, Platzierung des Loches ermitteln.

Platzierung des Loches hängt davon ab, ob das seitliche

Blendrahmen-Abdeckblech eine Aufkantung hat (d, e). Falls d oder

e gewählt worden ist, anschließend Loch bohren wie in c gezeigt.

Français : Retirer temporairement les profilés indiqués. S'il y a une

vis, la retirer (b). S'il y a une marque en partie haute à la place d'une

vis, percer un trou au travers de la marque (c). S'il n'y a ni vis ni

marque, déterminer la position du trou à réaliser. Sa position dépend

du profilé latéral du dormant, s'il a un bord tourné vers le haut ou

non (d, e). Si cela correspond à d ou e, percer le trou comme indi-

qué en c.

Dansk: Viste beklædningsdele afmonteres midlertidigt (a). Hvis der

sidder en skrue, fjernes denne (b). Hvis der i stedet for en skrue er

et mærke foroven, bores et hul gennem mærket (c). Er der hverken

skrue eller mærke, udmåles placering af hul. Hullets placering er

afhængig af, om sidekarmbeklædningen har en opkant eller ej

(d, e). Hvis d eller e er valgt, bores efterfølgende hul som vist i c.

Nederlands:

Verwijder tijdelijk de aangegeven afdeklijsten (a).

Als er een schroef zit, verwijder deze (b). Indien er een markering

in plaats van een schroef zit, boor dan een gat op de gemarkeerde

plaats (c). Als er geen schroef of markering zit, meet dan de juiste

positie op. De positie van het gat hangt af van het feit of de zij-

afdeklijst een opstaande rand heeft of niet (d, e). Wanneer gekozen

is voor d of e boor dan het gat zoals getoond bij c.

Italiano: Togliere temporaneamente i rivestimenti indicati (a). Se

c'è una vite, rimuoverla (b). Se c'è un segno sulla parte superiore

anziché la vite, forare in corrispondenza del segno (c). Se non c'è né

vite, nè segno, misurare la posizione del foro. La posizione del foro

dipende dal fatto che la cornice del rivestimento laterale abbia un

angolo rivolto verso l'alto (d, e). Se sono stati scelti d ed e forare di

conseguenza come illustrato in figura c.

Español: Desmonte los perfiles indicados, provisionalmente (a). Si

hubiera un tornillo, desmóntelo (b). Si hubiera una marca en la parte

superior, en vez de un tornillo, haga un taladro (c). Si no hubiera tor-

nillo ni orificio, mida la posición del orificio. La posición del orificio

depende de que el perfil lateral tenga un borde vuelto hacia arriba

o no (d, e). Si ha seleccionado d ó e haga el orificio como se indica

en c.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Velux MSL in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 6,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Velux MSL Manual

Product: