567742

Velodyne Wi-Q10BV Manual

11
Zoom out
Zoom in
Previous page
1/29
Next page
11
Setup Wi-Q User’s Manual
Step 4: Set Audio Receiver Options
It is important to set up the audio receiver to work in concert with the subwoofer. To set up the audio
receiver refer to its instruction manual and use one of the following options:
Audio Receiver Option #1
The audio receiver’s LFE or SUB output is the input to the subwoofer (most common case). Use the
audio receiver’s speaker menu and set as follows:
1. Select that you have a subwoofer.
2. Select the number of speakers.
3. Select the speaker size as small.
4. If you don’t know the low frequency limit of your main speakers, use 80 Hz as the crossover
point. The lower limit of the main speaker’s frequency response is usually listed in the speaker
specifications. For example, the specs might include an entry similar to the following:
“3 dB down at 45 Hz.”
In this example, double the 45 Hz value and use the 90 Hz doubled-value as the crossover
frequency.
5. Adjust the LFE /SUB output level to 0 dB.
Audio Receiver Option #2
The audio receiver’s full bandwidth R and L output channels are the input to the subwoofer (less
common case). Use the audio receiver’s speaker menu and set as follows:
1. Select that you have no subwoofer.
2. Select the number of speakers.
3. Select the speaker size as large.
Audio Receiver Option #3
The audio receiver has no LFE or SUB output. You don’t need to make any selections in the audio
receiver’s speaker menu.
Audio Receiver Options
Option #1
(Most Common)
Option# 2
(Less Common)
Option# 3
(Less Common)
Audio receiver has LFE or SUB
output
Yes Yes No
Use audio receiver’s LFE or
SUB output as subwoofer’s
input
Yes No No
Use audio receiver’s full
bandwidth R and L outputs as
subwoofer’s inputs
No.
This setup uses the
audio receiver’s
low-pass crossover
filter instead of your
subwoofer’s filter.
Yes .
This setup uses your
subwoofer’s low-pass
crossover filter instead
of the audio receiver’s
filter.
Yes .
This setup uses your
subwoofer’s low-pass
crossover filter instead
of the audio receiver’s
filter.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velodyne Wi-Q10BV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velodyne Wi-Q10BV in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info