567742
10
Zoom out
Zoom in
Previous page
1/29
Next page
10
Setup Wi-Q User’s Manual
Step 3: Mount WiConnect System Transmitter to Wall
(Optional)
You can mount the transmitter on the wall or place it with your other audio components. The transmitter
can be mounted in a vertical or horizontal orientation, and the Wi-Q system doesn’t need to be visible to
function properly.
1. Use the template below to mark the mounting locations on the wall.
2. Mark the two screw locations for either the horizontal or vertical mounting orientation.
3. Hand turn each of the included self-tapping wood screws into each marked location. Tighten the
screws until about 1/8” (3.17mm) of the screw shank is exposed.
Note: The provided wood screws aren’t suitable for stone or other hard wall surfaces. If you can’t
hand drive the screws, you may need to drill holes and provide other wall anchors.
4. Hook two of the slotted holes on back of the transmitter onto the two screws.
Figure 5: Transmitter mounting template
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velodyne Wi-Q10BV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velodyne Wi-Q10BV in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info