567709
35
Zoom out
Zoom in
Previous page
1/40
Next page
9) When Auto-EQ
PLUS
optimization finishes, the front display status message shows End for 10 seconds, the subwoofer reboots by
turning itself off and back on. The display shows the preset number and then volume level. During this process the new filter
settings are saved into the subwoofers memory.
10) While the subwoofer is rebooting, shut off the Sweep Tone CD and remove it from the player.
Figure 16: System Response Screen Auto EQ
PLUS
Mode
Running Manual EQ Optimization– Adjust it to Your Liking
In some particularly problematic rooms, it may be necessary to employ even further adjustment than the Auto-EQ
PLUS
. Manual EQ gives
enough flexibility to get the subwoofer response very flat:
1) Set up the microphone, subwoofer and Sweep Tone CD as in the Auto-EQ
PLUS
optimization instructions.
2) Connect your subwoofer to your TV video input as described above in the Make Video Connection between TV and
Subwoofer section.
3) Set the system playback volume level as in the Auto-EQ
PLUS
optimization instructions.
4) Push 1 – 2 – 3 – 4 – 5 on the remote. If you are already on the System Response screen, select the MANUAL option in the
EQ MODE area.
5) W
atch the status messages for SYNCING.
6)
When the status message says SYNCED, start adjusting the subwoofer parameters. Do not attempt to adjust any settings until the
status message says SYNCED. SYNCED means the subwoofer has synchronized its frequency measurement with the frequency
of the sweep tone being played through your audio system. An indication of not being synced is that you raise or lower filter slider
and the response curve moves at another frequency
. Also, the marker in the sweep tone (a small pop) occurs anywhere but at the
top of the graph.
7) Click Mute. You can now see the low frequency character of the satellites so that you can make a judgment about their roll-of
f
frequency and slope to properly blend to them with the Digital Drive
PLUS
subwoofer.
8) Click Mute again to restore the subwoofer to playing.
In Manual-EQ, if you press RESET on the remote, you are prompted if you want to save and exit, exit without saving, or to cancel
the exit action.
9)
Adjust the preset parameters.
10) Adjust the parametric filter EQ parameters.
11) Save your changes as described in the Save Settings section.
[ 33 ]
Digital Drive
PLUS
User Interface Manual
TV SCREEN USER INTERFACE FOR OPTIMIZATION
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velodyne DD-12plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velodyne DD-12plus in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Velodyne DD-12plus

Velodyne DD-12plus Quick start guide - English - 2 pages

Velodyne DD-12plus User Manual - English - 42 pages

Velodyne DD-12plus Quick start guide - German - 2 pages

Velodyne DD-12plus User Manual - German - 20 pages

Velodyne DD-12plus User Manual - German - 36 pages

Velodyne DD-12plus Quick start guide - French - 2 pages

Velodyne DD-12plus User Manual - French - 47 pages

Velodyne DD-12plus User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info