622070

Velleman WS1060 Manual

12
Zoom out
Zoom in
Previous page
1/77
Next page
WS1060
V. 02 – 26/04/2013 12 ©Velleman nv
11.2 Replacing the sensors
Refer to the illustrations on page 2-3 of this manual.
Replacing the rain collector and thermo-hygro sensor
To replace the rain collector and thermo-hygro sensor, proceed as follows:
1. Loosen the three screws [O] at the bottom of the rain collector.
2. Remove the rain collector from the base [P].
3. Loosen the 4 screws of the sensor cover and remove the cover [Q].
4. Unplug the data cable [R].
5. Loosen the screw [S] that fixes the sensor unit and pull it gently off the shaft.
6. Slide the new sensor unit on the shaft and fix it with the screw.
7. Reconnect the data cable.
8. Replace the sensor cover and fix it with the screws.
9. Place the new rain collector on the base.
10. Fix the rain collector to the base using the three screws at the bottom.
11. Use the bubble level [B] on the rain collector to check if the device is still perfectly level. If necessary,
adjust the position.
Replacing the wind sensor
To replace the wind sensor, proceed as follows:
1. Unplug the data cable: see Replacing the rain collector and thermo-hygro sensor for instructions.
2. Loosen the screw [T] that fixes the sensor unit and pull it gently off the shaft.
3. Slide the new sensor unit on the shaft and fix it with the screw.
4. Reconnect the data cable.
5. On the edge of the wind direction sensor, there are markers [N] representing the north (N), east (E),
south (S), and west (W). Use a compass (not incl.) to position the device so that the markers correspond
with your real location: the N marker must be directed north, the E marker east… If you do not position the
sensor correctly, the wind direction measurement will be incorrect.
6. Use the bubble level [B] on the rain collector to position the device perfectly level. If necessary, adjust the
position.
12. Technical Specifications
Outdoor data
Transmission distance
100 m (330 ft) in open field
Frequency
868 MHz
Measuring interval thermo-hygro
sensor
48 seconds
Temperature
Range
-40°C~+65°C (-40°F~+149°F)
Accuracy
±1°C
Resolution
0.1°C
Relative humidity
Range
1%~99%
Accuracy
±5%
Rain volume
Range
0~999.9mm (displays – – if out of range)
Accuracy
±10%
Resolution
0.3 mm (if rain volume < 1000 mm); 1 mm (if rain volume > 1000 mm)
Wind speed
Range
0~180 km/h (0~110 mph) (displays – – if out of range)
Accuracy
±1 m/s (wind speed < 10 m/s); ±10% (wind speed > 10 m/s)
Indoor data
Measuring interval (temperature
and humidity)
30 seconds
Temperature
Range
-9.9°C~+60°C (14°F~+149°F) (displays – – if out of range)
Resolution
0.1°C
Relative humidity
Range
1%~99%
Accuracy
±1%
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velleman WS1060 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velleman WS1060 in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info