Manual Velleman DVM4200 (page 10 of 72) (English, German, Dutch, French, Spanish)

622292

Zoom out

Zoom in

1/72

DVM4200

24.06.2015 ©Velleman nv

 Press the SHIFT button followed by the RANGE button, the meter enter PC-Link

mode. T the symbol “PC-LINK” will appear on the LCD [E] and the serial data

output function is active.

Notes:

 It is not possible to enter PC LINK during measurement; the meter must be

switched off first.

 Run the PC-LINK software, click the SET menu. Select the System Set. Then

select the proper COM port in the Serial Port Select. The COM port is normally

detected automatically. To determine the COM port manually, go to Device

Manager:

 Right-click the My Computer icon on the Windows desktop, and then click

Properties.

 Click the Hardware tab and then click Device Manager.

 Scroll through the list of installed devices and locate the Ports (Com and LPT)

entry. Click the plus (+) next to this entry to view the installed ports, If no

errors occurred, the “Prolific USB-to-Serial COM Port (COM x)” will appear, COM

x is the port, with x = a specific number.

 Select the default sampling rate or set a desired sampling rate.

 Now press the Start in the PC-LINK SOFT to measure and view the real-time data

or graph in the software interface.

 To disable the serial data output function, switch the meter OFF or press the

SHIFT button followed by the RANGE button.

 More information about the PC-LINK SOFT can be found in the help-file of the

software.

7. Operating instructions

Risk of electric shock during operation. Be very careful when

measuring live circuits.

Before measuring, always make sure the meter and/or test probes are not

damaged and verify the connections, selected function and range.

 Never exceed the limit value for protection. This limit value is listed separately in

the specifications for each range of measurement.

 Do not touch unused terminals when the meter is linked to a circuit which is being

tested.

 Only use the meter in the indicated overvoltage/installation category. Never

measure voltages that might exceed the indicated category values.

 When a measuring range is unknown, always select the highest possible range

and lower to the appropriate range.

 Disconnect the test leads from the tested circuit before rotating the range selector

in order to change functions.

 When carrying out measurements on a TV set or switching power circuits, always

remember that high amplitude voltage pulses at the test points might damage the

meter.

 Always be careful when working with voltages above 60Vdc or 30Vac rms. Keep

your fingers behind the probe barriers at all times during measurement.

 Do not measure current in circuits with voltages > 1000V.

 Never perform resistance, diode or continuity measurements on live circuits. Make

sure all capacitors in the circuit are depleted.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Velleman DVM4200 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Velleman DVM4200 Manual

Product: