622292
7
Zoom out
Zoom in
Previous page
1/72
Next page
DVM4200
24.06.2015 ©Velleman nv
7
This device is NOT suitable for:
Voltages above 1000V
Currents above 10A
This device is only suitable for measurements up to 600V in CAT IV
and up to 1000V in CAT III.
5. Pollution degree
IEC 61010-1 specifies different types of pollution environments, for which different
protective measures are necessary to ensure safety. Harsher environments require
more protection, and the protection against the pollution which is to be found in a
certain environment depends mainly on the insulation and the enclosure properties.
The pollution degree rating of the DVM indicates in which environment the device
may be used.
Pollution
degree 1
No pollution or only dry, nonconductive pollution occurs. The pollution
has no influence. (only to be found in hermetically sealed enclosures)
Pollution
degree 2
Only nonconductive pollution occurs. Occasionally, temporary
conductivity caused by condensation is to be expected.(home and office
environments fall under this category)
Pollution
degree 3
Conductive pollution occurs, or dry nonconductive pollution occurs that
becomes conductive due to condensation that is to be expected.
(industrial environments and environments exposed to outside air - but
not in contact with precipitation)
Pollution
degree 4
The pollution generates persistent conductivity caused by conductive
dust or by rain or snow. (exposed outdoor environments and
environments where high humidity levels or high concentrations of fine
particles occur)
Warning:
This device was designed in accordance with EN 61010-1 pollution degree 2. This
implies that certain restrictions in use apply that are related to pollution which can
occur within the environment of use. Refer to the table above.
This device is only suitable for measurements in Pollution degree
class 2 environments.
6. Description
Refer to the illustrations on pages 2 and 3 of this manual.
6.1 Multi-meter
1
LCD
7
COM terminal
2
function keys
8
PC link connector
3
rotary switch
9
not used
4
Hz terminal
10
foldable stand
5
µAmA terminal
11
battery compartment
6
10A terminal
6.2 Display
No.
Symbol
Meaning
A
auto power-off enabled
B
indicator for DC voltage or current
C
indicates negative readings
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velleman DVM4200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velleman DVM4200 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info