Manual Velleman DVM4100 (page 9 of 67) (English, German, Dutch, French, Spanish)

622291

Zoom out

Zoom in

1/67

6.4 Mode description

DATA HOLD mode

 In Data Hold mode, the display is not longer updated.

 Press the HOLD button to enter Data Hold mode. H is shown on the display [F].

 When Data Hold mode is enabled in auto range mode, the meter switches to

manual ranging mode.

 To exit Data Hold mode, press the RANGE or HOLD button

Manual / Auto range mode

 The meter has both manual and auto range options.

 In the auto range mode, the meter selects the best range for the input detected.

This allows you to switch test points without having to reset the range. When the

meter is in the auto range mode, AUTO is displayed [D].

 In the manual ranging mode, the range must be selected manually. This allows

the user to override auto range and lock the meter in a specific range.

 The meter defaults to auto range mode for measurement functions that have

more than one range.

 To enter and exit the manual range mode press the RANGE button. Press

successively to scroll through the available ranges.

 To exit the manual ranging mode, press and hold down RANGE key for two

seconds. The meter returns to the auto range mode and AUTO is displayed.

Sleep mode

 The Meter enters the "sleep mode" and blanks the display if the meter is on but

not used for 30 minutes.

 Press the HOLD button or rotate the rotary switch to wake the meter up.

 To disable Sleep mode, hold down the SELECT key while turning the meter on.

Relative measurement mode

 Relative measurement mode is available during all functions except frequency.

 To enter and exit the relative measurement mode, start the measurement.

 Press REL key to store the measured value and activate the relative

measurement mode. The difference between the reference value and subsequent

reading is displayed. REL is shown on the display [G].

 Press REL key for more than 2 seconds to return the meter to normal operation.

6.5 PC Link (model DVM4100 only)

 PC Link is only compatible with Windows XP, Vista and Windows 7 32 & 64 bit.

 The DVM4100 has a serial data output function.

 Before continuing the necessary USB driver and software must be installed on the

PC. Insert the included CD ROM into a suitable PC. Locate and open the file

README.pdf for the installation procedure (English only). Follow the instructions

on the screen

Notes:

 First install the PC-link software followed by the USB driver, than restart the PC.

 log in on the PC as administrator. For Vista/Windows 7 systems, disable the

UAC (User Account Control) (via Control Panel – System and Security – Action

Center – User Account Control settings -> Never notify.)

 Connect the meter to a USB port of a PC using the included data cable.

 Press and hold the Hz % button while turn on the meter, the meter enter PC-Link

mode. T the symbol “PC-LINK” will appear on the LCD [E] and the serial data

output function is active.

Notes:

 It is not possible to enter PC LINK during measurement; the meter must be

switched off first.

 To disable the auto power off function, simultaneously hold down the SELECT

and Hz% button while turning the meter on.

 Run the PC-LINK software, click the SET menu. Select the System Set. Then

select the proper COM port in the Serial Port Select. To determine the COM port,

go to Device Manager:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Velleman DVM4100 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Velleman DVM4100 Manual

Product: