578346
46
Zoom out
Zoom in
Previous page
1/65
Next page
37
INSTRUCTION MANUAL
step 2 Beginning of the recording:
Start the recording
4sec. Switch on/switch off the acoustic pulse signal
step 3 End/interruption of the recording:
AUTOMATIC after the countdown time elapses
Manual interruption = stop recording
step 4 Display of the values (even during recording)
Display data via the LIMIT LO HI pulse menu
(Display automatically shows the times for the three ranges in %)
- Time above the high limit
- Time between the limit values
- Time under the low limit
step 5 Deleting recorded data
4sec.
TIP: At the end of the training unit measure the recovery time or the
recovery pulse to determine your training status, see chapter 7.4.
Recovery time and recovery pulse.
Note: All bicycle altitude and pulse function can also be called up during
timer operation via the ç ¥ buttons.
TIP: At the end of your countdown timer measure the recovery time or
the recovery pulse to determine your training status. See 7.4. Recovery
time and recovery pulse.
14.4. TRAINING WITH THE LAP TIMER
The lap timer of your VDO computer is designed for lap training. You
can record up to 50 laps manually. In this case your computer saves
the following values for each lap:
- Lap time
- Average pulse during the lap
- Average speed during the lap (IMPORTANT: no display in walk mode)
With these values you have an outstanding method of analyzing the
development of your performance if you always do the same laps. This
could be certain mountain values or at stretches on your training lap.
The lap timer function can be set in bicycle mode and in walk mode.
Important:
1. The values saved for the individual laps can only be shown in the
display in recall mode after concluding the measurement.
2. If the lap timer is running the residence period of the pulse frequency
in the selected training ranges is recorded (compare 13.1)
step 1 Preparing the recording:
- Set the training ranges automatically chapter 7.1, or manually
chapter 7.2
- Select training program limit 1, limit 2, limit 3, chapter 7.3
- In the TIMER SETTINGS setting menu select the lap timer chapter
13.1.
.
step 2 Starting/changing/interrupting laps:
Switch on/switch off the acoustic pulse signal
Start lap 1
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VDO Z3 PC-Link at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VDO Z3 PC-Link in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of VDO Z3 PC-Link

VDO Z3 PC-Link User Manual - German - 65 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info