578346
44
Zoom out
Zoom in
Previous page
1/65
Next page
35
INSTRUCTION MANUAL
14. TRAINING CONTROL WITH THE PULSE FUNCTIONS
See chapter 13 for information on making the settings. For focused
training control it is necessary to keep the pulse in certain ranges
through specic stress, see chapter 7.2. The different training
programs are dened by a low limit and high limit. The pulse range
between the two values is usually the target range for your training.
After determining the pulse ranges (automatically or manually) your
VDO computer records the residency period in the target range as
well as the times above and below the target range. For real-time
monitoring your VDO computer indicates when you leave the target
range via an acoustic signal, if you have set this function beforehand
(see chapter 13.1)
14.1. TRAINING WITH THE STOPWATCH
The stopwatch offers the easiest possibility for capturing pulse data.
When the stopwatch is running pulse data is recorded. Interruption/
continuation of the recording is possible at any time with .
step 1 Preparing the recording:
- Set the training ranges automatically chapter 7.1, or manually chapter
7.2
- Select training program limit 1, limit 2, limit 3, chapter 7.3
- In the TIMER SETTINGS setting menu select STOPWATCH, chapter
13.2.
step 2 Beginning of the recording:
Start the recording
4sec. Switch on/switch off the acoustic pulse signal
step 3 End/interruption of the recording:
Stop the recording
step 4 Display of the values (even during recording)
Display data via the LIMIT LO HI pulse menu (display
automatically shows the times for the three ranges
in %)
- Time above the high limit
- Time between the limit values
- Time under the low limit
step 5 Deleting recorded data
4sec.
TIP: At the end of the training unit measure the recovery time or the
recovery pulse to determine your training status. See 7.4. Recovery
time and recovery pulse
Note: All bicycle altitude and pulse function can also be called up during
timer operation via the ç ¥ buttons.
14.2. TRAINING WITH TIMER 1 / TIMER 2 / TIMER 1+2
Independently of each other Timer 1 or timer 2 offer the possibility of
integrating intervals with manual control in the training.
Timer 1: Programmable timer with forward counting, auto-repeat
function, single beep after elapse of timer 1.
Timer 2: Programmable timer with forward counting. Auto-repeat
function, double beep after elapse of timer 2.
PULSSIGNAL
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VDO Z3 PC-Link at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VDO Z3 PC-Link in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of VDO Z3 PC-Link

VDO Z3 PC-Link User Manual - German - 65 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info