Manual VDO Dayton cd 3100 (page 4 of 22) (English)

165783

Zoom out

Zoom in

1/22

* Depending on version

METAL SLEEVE

Insert metal sleeve into the opening (182 x 53 mm) in the car dashboard

or console (fig. 7). See separate installation card. For optimal performance

of the CD player*, the metal sleeve should be positioned within the limits

shown (between -10° and +30°).

Fix metal sleeve into place by pressing the metal tags outwards using a screwdriver (fig. 8).

CONNECTING RADIO (fig. 9)

In order to make full use of the ON/OFF logic function of this set, which limits operation to

1 hour after removal of the ignition key, use adapter EA6259 for most cars excluding most

German makes.

Ensure battery is disconnected.

Insert aerial connector E into aerial socket. Good reception is only possible with a good aerial.

Fix aerial adapter (EA6257/00) if needed. Use hook (J) on back of set to secure fixing.

Insert power supply connector A into socket A’.

Insert loudspeaker connector B into socket B’.

• (optional) Remove the protective cover from socket C’.

• (optional) Insert the yellow line-out connector C1 into socket C1’.

• (optional) Insert the blue CD changer connector C3 into socket C3’.

• (optional) Insert the green connector C2 into socket C2’.

The green connector slides between the yellow connector C1 and the blue connector C3.

You need at least one of these connections to keep C2 in place.

MOUNTING RADIO

Slide the radio into the metal sleeve until the springs at either side of the radio snap into

the openings of the sleeve (fig. 10). NOTE: This set can be mounted in a Japanese car, please

consult your dealer.

Reconnect the negative car battery terminal (fig. 11). Installation is now complete.

REMOVING RADIO (fig. 12)

You can unlock the radio using the two U-brackets supplied.

Remove the front, see ‘SECURITY’, ‘DETACHABLE FRONT’.

Insert both U-brackets into the holes on the front of the set until they lock.

Remove the radio from the metal sleeve.

REPLACING FUSE (fig. 9)

• Pull fuse F out of connector block at rear of radio. Replace with a 10 A blade-type fuse.

The new fuse must be of exactly this value and type otherwise the set will not be adequately

protected. Ignoring this procedure may lead to damage to the set, which will invalidate the

guarantee.

INTERFERENCE SUPPRESSION

Most modern cars have sufficient interference suppression. If you experience interference generated

by the car, consult your garage.

MOUNTING

RC719/819 GB 24/02/00 15:06 Page 5

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of VDO Dayton cd 3100 in the language / languages: English as an attachment in your email.

The manual is 0,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

VDO Dayton cd 3100 Manual

Product: