165783
22
Zoom out
Zoom in
Previous page
1/22
Next page
23
GB
* Depending on version
Symptoms Possible Cause / Remedy
Radio
Display shows frequency (not station name). Set is tuned to non-RDS station or RDS is not
active, see INITIAL SETTING option RDS.
Display shows ALARM. Emergency announcement is being broadcast.
Unable to tune to desired station with Check the tuner standard, see INITIAL
search tuning. SETTINGS.
The desired station is too weak:
Tune to desired station using Manual tuning.
Check that the aerial is fully extended.
Set is in TA mode: only stations with Traffic
Announcements can be tuned in.
If necessary switch off the TA mode.
Display shows PI SEARCH. A preset has been requested but the frequency
is not available or is lost.
Display shows TP LOST. Station has turned off the TP (TRAFFIC
PROGRAMME) signal intentionally or the signal
is too weak, or you are entering an area where
no stations provide Traffic Announcements.
Display shows NO PTY. Search launched but no stations found.
Cassette*
Cassette playback lacks high-notes or loss Clean cassette player tape head (see CARE
of one channel. OF CASSETTES).
Cassette mechanism changes direction of play Rewind cassette to the end of the tape.
before end of tape.
Display shows TAPE ERROR. Check tape for faults.
CD*/CD Changer (if connected)
Display shows NO CD. Check that the magazine has been loaded
with discs
Display shows CD ERROR or TOC ERROR Check that the discs have been inserted
and set beeps. the correct way up and that you have not
inserted a damaged or dirty disc.
Distorted sound during playback. Player unable to read disc. CD damaged or dirty.
CD player does not function. If the external temperature is below - 5°C,
there may be some condensation on the laser.
Use the set in radio mode for about 5 minutes
to allow the moisture to evaporate.
If you still have to send your set for service, always send the complete set (with detachable front).
Do not try to open the set to service it yourself.
RC719/819 GB 24/02/00 15:06 Page 23
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VDO Dayton cd 3100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VDO Dayton cd 3100 in the language / languages: English as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info