540880
66
Zoom out
Zoom in
Previous page
1/85
Next page
Vanguard
TM
Twin-Cylinder OHV Liquid-Cooled Engine
Section 5 - Engine Assembly
Page 61
INSTALL FLYWHEEL
1. Clean flywheel and crankshaft taper. Remove all
oil, dirt or grease.
2. Assemble flywheel to crankshaft and align
keyways.
3. Insert flywheel key into keyways.
4. Place flywheel strap wrench, Tool
#19433 around
outer rim of flywheel, Fig. 151. Torque flywheel
nut to
150 ft. lbs. (203 Nm).
5. Install fan pulley. Torque to
140 in. lbs. (16.0 Nm).
Fig. 151
INSTALL CYLINDER HEADS
1. Install cylinder heads with new gaskets.
NOTE: Arrow on gasket must face flywheel side.
2. Lubricate threads of head bolts with Valve Guide
Lubricant
#93963.
NOTE: Install short head bolt below spark
plug hole.
3. Torque bolts in sequence shown to
30 ft. lbs. (40.0
Nm)
, Fig. 152.
4. Insert push rods into recess in tappets.
Fig. 152
INSTALL ROCKER ARMS
1. Lubricate rocker arm supports with clean engine
oil.
2. Assemble rocker arm supports and rocker arms to
cylinder head, Fig. 153. Torque screws to
100 in.
lbs. (11.0 Nm)
.
Fig. 153
CAUTION: Make sure push rods are seated in recess
in rocker arms and tappets.
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vanguard Twin Cylinder OHV Liquid-Cooled at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vanguard Twin Cylinder OHV Liquid-Cooled in the language / languages: English as an attachment in your email.

The manual is 7,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info