540878

Vanguard Single Cylinder Manual

49
Zoom out
Zoom in
Previous page
1/281
Next page
48
2
Meter should display 9 volts or more when
cranking engine.
If less than 9 volts:
• Replace battery.
8. With battery charged, check specific
gravity readings of each cell (B) with a
hydrometer
([A] Fig. 36).
9. Record the results.
Fig. 36
Readings should be above 1.250 (compensating
for temperature).
Replace the battery if specific gravity readings
vary 0.50 or if all cells read less than 1.225.
Stop Switch Test
1. Move speed control to FAST, then to
STOP. The control lever tab (A) m ust
contact the stop switch tang ([B] Fig. 37).
Fig. 37
If control lever does not contact stop switch
tang:
• Check control cable for adjustment or
binding. Bend tang as required or
replace worn parts as needed.
2. Inspect stop switch mounting to be sure
switch is firmly anchored in control
bracket. Replace switch if it cannot be
anchored securely.
3. Set meter to test for continuity. See Figure
8.
4. Move speed control to FAST.
5. Disconnect stop switch wire ([A] Fig. 37)
at ignition armature ([C] Fig. 37).
6. Connect test probe to wire terminal ([B]
Fig. 37)
Fig. 38
7. Connect one test lead to switch tang ([D]
Fig. 37) and the other lead to ignition stop
wire.
NOTE: Ensure that control lever tab ([F] Fig. 38)
does not contact switch tang at ([E] Fig. 38).
… 49 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vanguard Single Cylinder at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vanguard Single Cylinder in the language / languages: English as an attachment in your email.

The manual is 8,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info