655265
46
Zoom out
Zoom in
Previous page
1/116
Next page
7.2.2. RCP Mode Switching
In RCP mode switching, RCP controls the system mode. This mode is only applicable to a
radar system.
Mode switching is normally used for switching between redundant systems due to fault
detection.
When RCP mode switching is enabled in IRIS, socket mode switching and status product
mode switching are unavailable. RCP can choose one of the following:
Force the mode to switch. This disables all other choices, so manual mode switching
and automatic mode switching are disabled.
Enable the other choices. In RCP mode switching, the Automatic Modes Switching
button is controlled by the RCP.
For more information, see the appendix on dual radar systems in Radar Control
Processor RCP8 User Guide.
7.2.3. Socket Mode Switching
In socket mode switching, modes are supplied by a socket message. Use this mode to:
Switch modes based on input from another software system
Trigger mode switch based on a Bitex status (in this case the input is an IRIS message).
In socket mode switching, RCP can do one of the following:
Force the mode to switch. This disables all other choices, so manual mode switching
and automatic mode switching are disabled.
Enable the other choices.
In socket mode switching, the Automatic Mode Switching button is controlled by the
socket.
This mode is only available when RCP mode switching is disabled.
7.2.4. Status Product Mode Switching
Status product mode switching allows a system to slave its configuration to a master system
based on the status products from that master.
Each time a status product arrives from that other system, the mode is forced to match.
This is used as part of a passive IRIS system, or to slave a RPG computer to a RDA computer
in redundant systems.
You can change modes through manual mode switching or automatic mode switching.
7.2.5. Automatic Mode Switching
In automatic mode switching, mode transitions can be controlled by warning products.
IRIS User Guide M211317EN-E
44
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vaisala IRIS Radar at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vaisala IRIS Radar in the language / languages: English as an attachment in your email.

The manual is 5,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info