655265
45
Zoom out
Zoom in
Previous page
1/116
Next page
Table 12 Safety Parameter Report Examples
Safety Parameter Description
Air Flow Shows whether the cooling air flow in the transmitter is Normal or Fault.
Interlock Shows the status of the safety interlock circuit. For example on a high voltage cabinet
door, the status is either Normal (door closed) or Fault (door open).
Magnetron Shows the magnetron current as Normal or Fault.
Waveguide Shows the waveguide pressure as Normal or Fault.
BITE Shows OK or Fault for the optional BITE unit.
For information on faults, see the Bitex section in IRIS and RDA Utilities Guide.
Fault Alarms Sent to IRISnet
The red or yellow fault indicator in IRISnet shows the state of the Radar Status Menu on a
host.
A red
field in Radar Status menu causes a cross indicator to the IRISnet icon. The cross is red
for critical alarms, and yellow for non-critical alarms.
The Site Status
field of Radar Status Menu is not indicated in IRISnet.
Since Site Status shows other sites, it would be confusing if a fault in Site A causes an
IRISnet Red X on site B just because site B was receiving status products from A.
If a local fault causes the site status to go red, that fault is indicated elsewhere in the
Radar Status Menu.
You can set some faults to be critical or non-critical. For example:
Radar, Product Generator, or Output Processes turned–o (buttons at the top). These
are always critical.
DSP or RCP communication error (sub-system status
fields). These are always critical.
Antenna/Transmitter Status: BITE (configurable in BITEX to be null, critical or non–
critical)
Antenna/Transmitter Status: Air Flow, Waveguide, Interlock, Magnetron
(configurable
in setup/rcp to be critical or non–critical).
7.2. Mode Switching
7.2.1. Manual Mode Switching
1. To switch modes manually, do one of the following:
Select File > Change RST and select the new mode.
Load a new
configuration in the Radar Status menu.
Chapter 7 – Using the Radar Status Menu
43
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vaisala IRIS Radar at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vaisala IRIS Radar in the language / languages: English as an attachment in your email.

The manual is 5,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info