655265
38
Zoom out
Zoom in
Previous page
1/116
Next page
The name assigned to the Radar Status menu defines a complete mode of operation.
To set up a mode of operation, set-up and save the Radar Status menu.
1. Make sure IRIS has started.
2. Select Menus > Radar Status.
When IRIS starts, the IRIS DEFAULT
configuration loads.
3. If you want to use a mode other than DEFAULT, select File > Open and then a
configuration file from the list.
Do not set the DEFAULT IRIS
configuration for the Radiate switch to come
up as On or Auto if it could represent a hazard to personnel.
For installations where this could be a problem, create a DEFAULT file which starts the
radar with Radiate and Antenna Servo as O, so the antenna does not start scanning
automatically when the IRIS command is issued.
CAUTION!
4. Check the status of the devices to make sure all subsystems function normally.
In particular, check that the RCP status is Computer and not Local. If the status is Local,
set the mode switch on the radar console so IRIS can control the system.
5. Verify that the Radar Process is On. Toggle real time display On or
O, as required.
6. Toggle T/R Power and Servo Power on.
7. Set Radiate to Auto or On, as required.
Auto allows IRIS to automatically turn the transmitter
o when the system is idle.
8. To check or schedule tasks or products:
a. If tasks are scheduled and one is running, check that the Ingest Process shows the
name of the active task, and the antenna speed and position indicators show that
the antenna is moving.
b. Schedule additional tasks or products, if needed.
See 9.1. Task Scheduling Overview (page 69) and 10.2. Scheduling Products
(page 79).
7.1.1. Control Section
The Radar Status > Control Section pane includes tools for:
Viewing active IRIS mode
Loading and saving IRIS
configurations
Starting and stopping the major IRIS processes
Starting and stopping the radar transmitter
Device resets for selected equipment
IRIS User Guide M211317EN-E
36
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vaisala IRIS Radar at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vaisala IRIS Radar in the language / languages: English as an attachment in your email.

The manual is 5,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info