602563
29
Zoom out
Zoom in
Previous page
1/40
Next page
9Installation instructions VRC 430f 0020042470_01
1
2
Fig. 5.1 Radio receiver electrical connections
Key
1 Terminal rail for the wireless unit wall plinth
2 Heating unit terminal rail
h
Note!
The bridge between terminal 3 and 4 (see
Fig. 5.1) must not be removed.
When connecting the eBUS cable there is no
need to observe the correct polarity. Communi-
cation is not adversely affected by swapping
the two connections.
Proceed as follows :
Connect the eBUS cable to the terminal strip (1) of
the wall socket for the radio receiver unit.
Install the strain relief (4, Fig. 4.1).
Connect the eBUS cable to the terminal strip of the
appliance (2).
6 Initial commissioning
Prerequisites:
The controller, the radio outdoor sensor and the radio
receiver unit are installed correctly.
The appliance is switched on and ready for operation.
h
Note!
Please ensure that both rotary knobs (hot
water outlet-/cylinder temperature and heating
flow temperature ) on the heating unit are set
to maximum (all the way to the right). This en-
sures an optimum level of control by the
VRC 430f.
Note!
The button on the radio receiver unit is only re-
quired for "teaching" components on the radio
network following the replacement of parts.
The VRC 430f operator control concept is explained in
Section 4.3 of the operating instructions. 4.3 Explana-
tion.
6.1 Installation assistant
The installation assistant provides you with support dur-
ing initial start up. The installation assistant automati-
cally detects all components that are connected to the
heating system.
Up to six screens are available in the display (A1 to A6)
depending on the configuration of the heating system.
The most important parameters of the heating system
can be entered via the installation assistant.
The installation assistant starts at the first screen A1:
Language selection.
Select the language in accordance with the operator
control concept (operating instructions Section 4.3).
Turn the left-hand dial clockwise by one position
(click) to display additional screen A1.
Installation assistant
RF links
A1
Outdoor temperature sensor 10
Controller 10
Learn mode OFF
> Select mode
Fig. 6.1 Installation assistent screen A1
You can read off or check the quality of the radio signal
path between the controller or outdoor sensor and radio
receiver unit here.
Installation 5
Initial commissioning 6
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vaillant VRC 430f at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vaillant VRC 430f in the language / languages: English as an attachment in your email.

The manual is 6,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info