748581
9
Zoom out
Zoom in
Previous page
1/16
Next page
Operation 4
0020258609_00 ecoVIT exclusiv Operating instructions 9
4.5 Setting the cylinder temperature
Conditions: Control connected
1
2
1 Display 2 Cylinder temperature
rotary knob
Set the rotary knob for the cylinder temperature (2) as
far as it will go clockwise so that the control can work
without any faults occurring.
Do not set the required cylinder temperature on the
rotary knob for the cylinder temperature; set the cylinder
temperature on the control instead.
Conditions: No control connected
1
2
1 Display 2 Cylinder temperature
rotary knob
Set the rotary knob for the cylinder temperature (2) to
the required cylinder temperature.
Position of the rotary knob for setting the cylinder tem-
perature ( Page 9)
The required temperature is shown in the display
(1). After three seconds, this display goes out and
the default display reappears (current heating flow
temperature).
Note
The maximum cylinder temperature is set in
the factory at 65 °C. This can be defined by
the competent person to be between 50 °C
and 70 °C.
Note
If a cylinder temperature lower than 60 °C is
required, we recommend that you regularly
use the anti-legionella function via the control.
Position Meaning Temperature
Fully left Minimum cylinder
temperature = frost
protection
15
Centre Medium cylinder
temperature
50
Fully right Maximum cylinder
temperature
65
4.6 Switching off the functions
4.6.1 Switching off heating mode
Note
You can completely switch off heating mode in
summer without switching off the hot water gener-
ation.
1
1 Rotary knob for setting
the heating flow temper-
ature
To switch off heating mode, turn the rotary knob for set-
ting the heating flow temperature (1) as far as it will go
anti-clockwise. If the product is controlled by a control,
use this control to switch off heating mode and leave the
rotary knob at the clockwise end stop.
Note
The product's internal frost protection is there-
fore guaranteed whether there is a control or
not.
4.6.2 Switching off cylinder charging mode
(using the VRC 630/VRS 620 control)
1. Leave the rotary knob for the cylinder temperature at
the clockwise end stop.
2. Switch the cylinder circuit to "OFF" on the control.
Note
If the VRC 450 or VRC 700 control is avail-
able, switch cylinder charging mode off in
accordance with the section "Switching off
cylinder charging mode (without a control)
( Page 10)".
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vaillant ecoVIT exclusiv VKK 286-4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vaillant ecoVIT exclusiv VKK 286-4 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vaillant ecoVIT exclusiv VKK 286-4

Vaillant ecoVIT exclusiv VKK 286-4 User Manual - German - 20 pages

Vaillant ecoVIT exclusiv VKK 286-4 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info