503144

V-Zug CCSSL60 Manual

22
Zoom out
Zoom in
Previous page
1/199
Next page
22
TROUBLESHOOTING
Below is a list of some of the possible malfunctions. If the pro-
blem cannot be resolved as described, contact Customer Servi-
ces.
PROBLEM POSSIBLE CAUSE SOLUTION
The coee is not hot The cups were not preheated.
The infuser has cooled down because
2/3 minutes have elapsed since the last
coee was made.
The set temperature is too low.
Warm the cups by rinsing them with hot water.
Before making coee, preheat the infuser by selecting the
RINSING function in the menu.
Change the set temperature (see section “Changing coee
temperature”).
The coee is not
creamy enough.
The coee is ground too coarsely.
Wrong type of coee
Turn the grinding adjustment dial one click anticlockwise
towards “1” while the coee mill is in operation (g. 14).
Use a type of coee for espresso coee machines.
The coee is delivered
too slowly or a drop at
a time.
The coee is ground too nely. Turn the grinding adjustment dial one click clockwise towards
“7” while the coee mill is in operation (g. 14).
Continue one click at a time until coee delivery is
satisfactory.
The eect is only visible after delivering 2 coees.
The coee is delivered
too quickly.
The coee is ground too coarsely. Turn the grinding adjustment dial one click anticlockwise
towards “1” while the coee mill is in operation (g. 14).
Avoid turning the grinding adjustment dial excessively
otherwise when you select two cups, the coee may be
delivered a drop at a time.
The eect is only visible after delivering 2 coees.
Coee does not come
out of one of the
spouts
The spouts are blocked. Clean the spouts with a toothpick (g. 27).
The coee does not
come out of the
spouts, but from
around the service
door (A2).
The holes in the spouts are clogged
with dry coee dust.
The coee guide (A3) inside the service
door is blocked.
If necessary, remove coee deposits with a toothpick, sponge
or sti bristled kitchen brush (g. 27-29).
Thoroughly clean the coee guide (A3), particularly near the
hinges.
Water comes out of
the spouts instead of
coee.
The pre-ground coee may be blocked
in the funnel (A21).
Clean the funnel (A21) with a wooden or plastic fork, clean the
inside of the machine.
The milk does not
come out of the milk
spout (C5).
The intake tube is not inserted or is
inserted incorrectly.
Insert the intake tube (C4) in the rubber washer in the milk
container lid (g. 24).
The milk is not well
frothed.
The milk container lid is dirty.
The froth regulator is not positioned
correctly.
Clean the milk container lid as described in the section
“Cleaning the milk container”.
Adjust following the instructions in the section “Making
cappuccino”.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for V-Zug CCSSL60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of V-Zug CCSSL60 in the language / languages: English, German, Dutch, French, Italian, Swedish, Norwegian as an attachment in your email.

The manual is 26,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info