503144

V-Zug CCSSL60 Manual

21
Zoom out
Zoom in
Previous page
1/199
Next page
21
EN
DISPLAYED MESSAGES
DISPLAYED MESSAGE POSSIBLE CAUSE SOLUTION
FILL TANK The water tank is empty or
positioned incorrectly.
Fill the tank with water and/or insert it correctly,
pushing it as far as it will go.
GROUND TOO FINE ADJUST MILL
(alternating with)
PRESS OK
The grinding is too ne and the
coee is delivered too slowly.
Turn the grinding adjustment dial one click clockwise
towards “7”.
GROUND TOO FINE ADJUST MILL
(alternating with)
PRESS OK
(then)
FILL TANK
The tank has been removed during
delivery.
There is air in the hydraulic circuit.
Insert the tank and press the OK button (B4).
“HOT WATER PRESS OK” is displayed.
Press the OK button (B9) again.
The appliance is once again ready for use.
EMPTY GROUNDS CONTAINER The grounds container (A4) is too
full or more than three days have
passed since you last made coee
(this guarantees correct hygiene of
the machine).
Empty the grounds container and clean, then replace.
Important: when removing the drip tray, the grounds
container MUST be emptied, even if it contains few
grounds.
If this is not done, when you make the next coees, the
grounds container may ll up more than expected and
clog the machine.
INSERT GROUNDS CONTAINER After cleaning, the grounds container
has not been replaced.
Open the service door and insert the grounds
container.
ADD PRE-GROUND COFFEE The “pre-ground coee” function has
been selected without placing any
pre-ground coee in the funnel.
The funnel (A21) is blocked.
Extract the appliance and place pre-ground coee in
the funnel.
Empty the funnel with the help of a knife as described
in the section “Cleaning the pre-ground coee funnel”.
DESCALE
(alternating with)
COFFEE STANDARD
The machine must be descaled. The descaling procedure described in the “Descaling”
section needs to be performed as soon as possible.
LESS COFFEE Too much coee has been used. Select a milder taste or reduce the quantity of pre-
ground coee, then make the coee again.
FILL BEANS CONTAINER The coee beans have run out. Fill the beans container
INSERT INFUSER ASSEMBLY The infuser has not been replaced
after cleaning.
Insert the infuser as described in the section “Cleaning
the infuser”.
CLOSE DOOR The service door is open Close the service door.
GENERAL ALARM The inside of the appliance is very
dirty.
Clean the inside of the appliance thoroughly, as
described in the section “Cleaning and maintenance”.
If the message is still displayed after cleaning, contact
a service centre.
EMPTY CIRCUIT FILL CIRCUIT
alternating with
HOT WATER PRESS OK
The water circuit is empty Connect the hot water nozzle (A10) and press OK to
deliver water from it, until it ows out normally.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for V-Zug CCSSL60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of V-Zug CCSSL60 in the language / languages: English, German, Dutch, French, Italian, Swedish, Norwegian as an attachment in your email.

The manual is 26,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info