550282
110
Zoom out
Zoom in
Previous page
1/122
Next page
30
3 Preparation for a dive with microbubble levels (MB levels)
UWATEC
®
Smart dive computers
3.1 Setting the MB level
To change the MB level Smart Z must be in user mode.
1. Bridge contacts B and + or B and – until the symbol for MB levels appears.
2.
Confirm that you wish to change the displayed MB level by bridging B and E.
3. Change MB level by bridging contacts B and + or B and – .
4. Confirm with B and E the selected MB level.
Without confirmation the display will disappear after 3 minutes and your
entries will not be accepted.
Smart Z will display the
symbol to confirm that an MB level beyond L0
(L1-L5) has been chosen. If however a level stop is ignored, the new MB level
is permanently shown (->31).
MB levels have an influence on the dive planner.
4 Functions during the dive with microbubble levels
4.1 Level stop information
Microbubble (MB) no-stop time
While diving with MB levels L1 to L5 Smart Z will display the MB no-stop time instead of the ordinary no-
stop time. Within the MB no-stop time no level stops are required.
The arrow
NO STOP
and the MB level symbol are visible. The remaining MB no-stop time is shown
in minutes.
Information and alarms for MB no-stop time and ordinary no-
stop time are the same (->22).
Regardless of the MB level, we generally recommend to perform
a slow ascent during the last few metres / feet.
Level stop
On entering the level stop phase, the arrow
NO STOP
disappears and the arrow
LEVELSTOP
appears. The
LEVELSTOP
arrow flashes for 8 seconds and an audible
attention beep goes off. To complete the dive without being reduced to a lower
MB level, all requested level stops must be observed.
To the right of the
LEVELSTOP
arrow, the deepest level stop is displayed in
metres/feet. The display "3m 2:" ("10ft 2:") means that a level stop of 2 minutes
at a depth of 3 metres (10ft) has to be observed.
When a level stop obligation is finished, the next higher level stop if present
is displayed. When all level stops have been observed, the arrow
LEVELSTOP
extinguishes and the arrow
NO STOP
reappears. The indication of time shows
the MB no-stop time again.
NO STOP
MB no-stop time
+
CNS O
2
%
LEVELSTOP
Deepest level
stop depth
Total ascent time
Level stop duration
Level stop icon
110


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for UWATEC Smart PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of UWATEC Smart PRO in the language / languages: English as an attachment in your email.

The manual is 6,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of UWATEC Smart PRO

UWATEC Smart PRO User Manual - German - 120 pages

UWATEC Smart PRO User Manual - Dutch - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info