36
VI Dive planner
VI UWATEC
®
Aladin
®
dive computers
2 TEC Planning a decompression dive
1. Activate the dive planner for a no-stop dive ->35.
2. Set the desired depth with and , then switch into decompres-
sion planning by pushing . Aladin
®
TEC shows the bottom time (no-
stop time + 1 minute) and the appropriate decompression information or
level stop data respectively.
3. <Add> asks that you set the bottom time. This is done with and
. Aladin
®
TEC calculates the decompression information for this set
bottom time. If an MB level (L1-5) is selected, Aladin
®
TEC calculates the level
stop data.
CNS O
2
% values higher than 199% will be displayed as 199 %.
Ascent time > 99 minutes is displayed as <– –>
Deco stop depth deeper than 27m (90 ft) is displayed as <– – : – – >
CNS O
2
≥ 75%: CNS O
2
% symbol starts flashing
CNS O
2
≥ 100%: CNS O
2
% symbol and CNS O
2
% value are flashing
MB level stop deeper than 27m (90 ft): MB level will be reduced, pushing a
button shows the new MB level
3 Leaving the dive planner
By pushing once or twice you can exit the dive planner. This also occurs
after three minutes without operation.