550271

UWATEC Aladin Tec Manual

35
Zoom out
Zoom in
Previous page
1/48
Next page
English
35
VI Dive planner
VI UWATEC
®
Aladin
®
dive computers
VI
Aladin
®
has a dive planner which allows the planning of no-stop dives. TEC The dive planner allows
planning of decompression dives.
• selected fraction of oxygen and MOD
•
TEC
selected water type
•
TEC
selected microbubble level
• water temperature of the most recent dive
• altitude range (if any)
• status of saturation at the time the dive planner is selected
• assuming a normal workload of the diver and observance of the prescribed
ascent rates
If two or more divers using computers are planning a dive, planning for all
divers has to be based on the dive computer showing the shortest no-stop
times. Failure to do this may lead to serious injury or death from decompres-
sion sickness.
1 Planning a no-stop dive
To select the dive planner Aladin
®
must be in user mode (time of day display). Push or
until the symbol for the dive planner appears. (The dive planner cannot be selected in gauge mode.)
The microbubble warning and its duration are dis-
played if
Aladin
®
detects an increased risk due to the
accumulation of microbubbles.
Enter the dive planner with .
The input window for the time interval is displayed
if there was a remaining desaturation (DESAT) befo-
re the dive planner has been selected. This surface
interval between now and the beginning of the dive
can be changed with and in steps of
15 minutes. Aladin
®
displays the CNS O
2
% value
and the altitude section to which you may not rise
at the end of the selected surface interval.
If a microbubble warning (no dive) and its duration
has been displayed, Aladin
®
proposes this time –
rounded up to the next 15 minutes – as surface
interval. If the proposed interval is shortened, the
microbubble warning appears.
Confirm with the displayed interval (if applicable).
With
and set
the depth for which you want to know the
no-
stop time.
TEC
If a microbubble level has been selected (L1-L5), the MB no-stop time
is shown.
Depths deeper than the MOD for the selected gas (O
2
mix) are not displayed.
On page 26 you will find further information and safety considerations
regarding the microbubble warning.
NO
NO
NO
Input of the surface
interval by pushing
/
DEPTH
NO STOP
DEPTH
DIVE TIME
Icon for microbubble
level L1-L5
Enter the
dive planner
No-stop time or
MB no-stop time
Set desired depth
( and )
NO
NO
Microbubble warning
(Do Not Dive)
Duration of the
warning
CNS O
2
%
Dive planner icon
Basis of the planning:
WARNING
Select dive planner
or
until
if
NO
if rep. dive
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for UWATEC Aladin Tec at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of UWATEC Aladin Tec in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info