550348
8
Zoom out
Zoom in
Previous page
1/24
Next page
8
II UWATEC
®
Aladin
®
ONE
2 Operation
2.3 Switching on the display
automatically, on submerging in water or when adaptation to atmospheric
pressure is necessary;
manually,
by "bridging" the water contacts with a moistened finger.
Afterwards the display shows the time of the day, the O
2
mix and the tempera-
ture.
This display is called
time of day display.
If there is a remaining saturation from the last dive, Aladin
®
ONE displays the
logbook information of the last dive (depth, dive time, temperature,
O
2
%), the
surface interval, the "do not dive" icon (if applicable) and the residual nitrogen
loading as a bar graph ->18.
If there is a remaining saturation from a change of altitude,
Aladin
®
ONE displays
the mountain symbol,
the
adaption time as a
bar graph and the time interval
since the change in altitude class
.
Aladin
®
ONE does not display a No-Fly time. To pre-
vent decompression sickness or death, you must
wait at least 24 hours after your last dive before
flying.
When Aladin
®
ONE is in state of rest no information is displayed but the atmo-
spheric pressure is continuously monitored. If a change in altitude range is
detected, Aladin
®
ONE switches on for 3 minutes automatically ->20.
2.4 Switching off the display
On the surface Aladin
®
ONE switches off automatically after 3 minutes without
operation.
Time of day display
2.5 Battery warning and battery alarm
When the computer senses that the battery needs to be replaced, the steady
battery symbol appears at first (warning). This allows you to do some more
dives, but you should change the battery as soon as possible.
When the battery reaches a dangerously low level, the battery symbol starts
to blink (alarm).
Risk of computer malfunction!
The battery symbol blinks, on the surface and in
dive mode, to alert the diver of a dangerous situ
-
ation: the battery may not have enough energy
to finish a dive
.
Do not dive or finish the dive and replace the
battery ->21.
Replace the battery when the steady battery
symbol appears
->21!
The battery condition can be checked with SmartTRAK.
The temperature influences the battery performance. In cold water it is lower
than in warm water. If the battery shows
the steady battery symbol on the
surface, it is possible for it to start flashing during the dive.
WARNING
Flashing battery alarm
Logbook information
WARNING
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for UWATEC Aladin One at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of UWATEC Aladin One in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of UWATEC Aladin One

UWATEC Aladin One User Manual - German - 24 pages

UWATEC Aladin One User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info