596878
13
Zoom out
Zoom in
Previous page
1/66
Next page
ADJUSTING VOLUME
To adjust the master volume:
1. In idle mode, press the OK Key [OK] to unlock the keypad, then
press the Volume Keys up or down.
2. Select one of the following options and press the OK Key
[SET]
to save it.
All Sounds Off
Alarm Only
Vibrate Only
Low /
Medium Low /
Medium /
Medium High /
High
Press the Volume Keys up or down to adjust Earpiece volume during a call.
To play a ringtone, press the Left Soft Key [Play].
ADJUSTING THE CALL VOLUME
During a call, if you want to adjust the earpiece volume, press the Volume
Keys up or down. Press the Volume Keys up to increase the volume
level and the Volume Keys down to decrease the level. In Idle mode, you
can also adjust the ringer volume by following the same steps.
CALLER ID FUNCTION
Caller ID displays the number of the person calling when your phone
rings. If the caller’s identity is stored in Contacts, the name appears on the
screen. The caller ID is stored in the Recent Calls Menu.
VIBRATE ON/OFF MODE
Vibrate Mode mutes key tones and activates an alert for an incoming call or
message. To activate Vibrate Mode:
1. From the idle screen, slide out the QWERTY keyboard, and then press
and hold the # Key .
2. To return to a Medium High volume, from the idle screen press and
hold the # Key
again.
SPEAKERPHONE MODE
The Speakerphone feature lets you hear audio through the speaker and talk
without holding the phone.
To activate the Speakerphone in idle mode or while on a call, press the
Speakerphone Key . If you press the Speakerphone Key when
you are not on a call, Speakerphone mode will be active for one minute,
then turn itself off automatically.
22
Chapter 2 Basic Operation
Basic OperationBasic Operation
USING AUTO KEYPAD LOCK FUNCTION
When the Slide is closed, the Side Keys and the Directional Key are
locked. To unlock them, press any key, PRESS OK TO UNLOCK KEYPAD
displays, then press the OK Key [OK].
You can open the slide to unlock the keypad.
AVAILABLE OPTIONS DURING A CALL
During a phone call, you can access the following features by pressing the
Right Soft Key
[Options]:
MESSAGING
To access the Messaging Menu during a call:
1. Press the OK Key [OK] to unlock the keypad, then press the Right
Soft Key [Options], then slide out the QWERTY keyboard, and
press 1. Messaging”.
CONTACT LIST
To view your Contact List during a call:
1. Press the OK Key [OK] to unlock the keypad, then press the Right
Soft Key [Options], then slide out the QWERTY keyboard, and
press 2. Contact List”.
RECENT CALLS
To view your Recent Calls list during a call:
1. Press the OK Key [OK] to unlock the keypad, then press the Right
Soft Key [Options], then slide out the QWERTY keyboard, and
press 3. Recent Calls”.
BLUETOOTH MENU
To access the Bluetooth Menu during a call:
1. Press the OK Key [OK] to unlock the keypad, then press the Right
Soft Key [Options], then slide out the QWERTY keyboard, and
press 4. Bluetooth Menu”.
If an Audio device is connected, “Audio To Phone/Audio To Device is displayed in the
options menu instead of “Bluetooth Menu”.
Basic Operation Chapter 2
23
Basic OperationBasic Operation
080625_TXT8010_ELVIS_M_EN_REV00.indd 22-23080625_TXT8010_ELVIS_M_EN_REV00.indd 22-23 2008.6.25 9:34:42 PM2008.6.25 9:34:42 PM
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for UTStarcom Blitz at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of UTStarcom Blitz in the language / languages: English as an attachment in your email.

The manual is 5,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info