596878

UTStarcom Blitz Manual

12
Zoom out
Zoom in
Previous page
1/66
Next page
WAIT/PAUSE FEATURE
Pauses are used for automated systems (i.e., voice mail or calling cards).
Insert a pause after a phone number and then enter another group of
numbers. The second set of numbers is dialed automatically after the pause.
This feature is useful for dialing into systems that require a code.
Wait (W)
The phone stops dialing until you press the Left Soft Key
[Release] to
advance to the next number.
2-Sec Pause
The phone waits 2 seconds before sending the next string of digits
automatically.
1. Slide out the QWERTY keyboard, and from standby mode enter the
phone number.
2. Press the Right Soft Key
[Options].
3. Press the Directional Key
up or down to select pause type, then
the OK Key [OK]. “2-Sec Pause/Wait”.
4. Enter additional number(s) (pin number or credit card number).
5. Press the SEND Key
to dial or the Left Soft Key [Save].
ANSWERING A CALL
1. If your phone is set to “Slide Open” for “Answer Options,” simply
open the phone to answer a call. If your phone is set to “Any Key” for
“Answer Options,” press any key to answer a call.
If your phone is set to “Auto w/ Hands-free” for “Answer Options,”
calls are answered automatically with a 5 second delay. (“Auto w/
Hands-free” is available only when connected to a headset or hands-
free device.) For information on how to set your Answer Options,
see page 67.
2. To end the call, press the END Key
.
MAKING AN INTERNATIONAL CALL
1. Slide out the QWERTY keyboard, and then press and hold the * Key
. The + required for international calls will be displayed.
2. Enter the country code, area code, and phone number, then press
the SEND Key
.
3. To end the call, press the END Key
.
20
Chapter 2 − Basic Operation
Basic OperationBasic Operation
3WAY CALLING
With 3-Way Calling, you can talk to two people at the same time. When using
this feature, the normal airtime rates will be applied for each of the two calls.
1. Slide out the QWERTY keyboard, and then enter the phone number
you wish to call and then press the SEND Key
.
2. Once you have established the connection, enter the second phone
number you wish to call and then press the SEND Key
again.
3. When you’re connected to the second party, press the SEND Key
again to begin your 3-Way call.
If one of the people you called hangs up during your call, you and the remaining caller
stay connected. If you initiated the call and are the first to hang up, all three CALLS
are disconnected.
CALL WAITING FUNCTION
If you are on a call and you receive another incoming call, you will hear two
beeps and the caller’s phone number will appear on the display. With Call
Waiting, you may put the active call on hold while you answer the other
incoming call. To use Call Waiting:
1. To answer another call while on the phone, press the SEND Key .
This places the first call on hold. To switch back to the first caller,
press the SEND Key
again.
CALLING A NUMBER FROM CONTACTS
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the Right Soft Key [Contacts].
2. Press the Directional Key
up or down to select the Contact entry
then press the OK Key [VIEW].
3. Press the Directional Key
up or down to select the phone
number.
4. Press the SEND Key
to place the call.
Pressing the Directional Key up or down to select the “Contact entry” and then
pressing the Send Key will dial the Default Number of the Contact entry
automatically. If multiple numbers are saved in the “Contact entry”, press the Directional
Key up or down to select the “Contact entry” and then press the Directional Key
left or right to select the number you want to dial. Then press the Send Key .
Basic Operation − Chapter 2
21
Basic OperationBasic Operation
080625_TXT8010_ELVIS_M_EN_REV00.indd 20-21080625_TXT8010_ELVIS_M_EN_REV00.indd 20-21 2008.6.25 9:34:40 PM2008.6.25 9:34:40 PM
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for UTStarcom Blitz at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of UTStarcom Blitz in the language / languages: English as an attachment in your email.

The manual is 5,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info