741501

Urmet 46 Manual

11
Zoom out
Zoom in
Previous page
1/40
Next page
11
DS1168-007
Either hold pressed for at least 5 seconds or leave the device inactive for more than 30 seconds to quit
programming mode.
The red button turns blue, the device will generate a long confi rmation beep and then return to normal
operation.
DELETING AN ACTIVATION CODE
Access programming mode.
Enter confi guration code 99 nn where:
99 identifi es the function code to be deleted
nn defi nes the code memory location; possible values from 01 to 22.
Press
to confi rm.
The device generates 3 confi rmation beeps and the button turns from red to blue to red.
If the entered code is wrong, the device will generate one long beep and wait for the correct code to be
entered.
Either hold pressed for at least 5 seconds or leave the device inactive for more than 30 seconds to quit
programming mode.
The red button turns blue, the device will generate a long confi rmation beep and then return to normal
operation.
SETTING A SLAVE PASSWORD FOR CHANGING ACTIVATION
CODES ONLY
The code edit password may only be used to edit the activation codes without accessing programming
mode.
Enter programming mode to set the SLAVE password.
Enter confi guration code 36 xxxxxxxx where:
36 identifi es the password change code for changing the codes
xxxxxxxx defi nes the new password which will replace the one used to access programming mode
(from 3 to 8 digits).
Press to confi rm.
The device generates 3 confi rmation beeps and the button turns from red to blue to red.
If the entered code is wrong, the device will generate one long beep and wait for the correct code to be
entered.
Either hold pressed for at least 5 seconds or leave the device inactive for more than 30 seconds to quit
programming mode.
The red button turns blue, the device will generate a long confi rmation beep and then return to normal
operation.
CHANGING A PREVIOUSLY STORED ACTIVATION CODE
Press , , in sequence.
Enter the password for changing the activation codes only.
Press to confi rm.
The device generates 3 confi rmation beeps and the button turns from blue to red.
Enter confi guration code 90 oooo where:
90 identifi es the code change function code
oooo is the old activation code
Press to confi rm.
Enter the new activation code (from 3 to 8 digits).
Press to confi rm.
The device generates 3 confi rmation beeps and the button turns from blue to red.
If the entered code is wrong, the device will generate one long beep and wait for the correct code to be
entered.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Urmet 46 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Urmet 46 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info